Operating instructions

2.2 Internal Switches

In the control behind the display there are three pre-selector switches

for setting certain machine parameters.

CAUTION !

The switches are only evaluated once when the sewing unit is turned

on.

After changing a switch setting switch the main switch off and then on

again or operate the

STOP

key.

DIP-Switch b417:

745-22;-23 745-24

b417 Function OFF ON OFF ON

.1 Stitch Length 2,5 mm 3,2 mm 2,5 mm 3,2 mm

.2 Stitch Condensation Stitch Length 0,8 mm 1,4 mm 0,8 mm 1,4 mm

.3 Maximum Sewing Length 180 mm 200 mm 180 mm 200 mm

.4 Thread Monitor ON OFF No function

.5 Locking Vacuum (b8 / s14) OFF ON OFF ON

.6 Late Opening of the Flap Clamps OFF ON OFF ON

.7 with Reverser Device OFF ON No function

.8 Continuous Operation OFF ON OFF ON*

(only in combination with .4 "OFF")

* Thread monitor is turned off

745-22;-24

: b417.7 = OFF

745-23

: b417.7 = ON (with Reverser Device)

Dial b401: Dial b402:

Sewing Revolutions Operation Mode of the Left Transport Clamp

b401 = 1 2500 1/min b402 = 0 No function

b401 = 2 2750 1/min b402 = 1 Lower left transport clamp

b401 = 3 3000 1/min separately

b402 = 2 Lower left transport clamp with the

right

DIP-Schalter

b417 b401 b402

off