Operating instructions

2.3 Display
The Microcontrol is equipped with a 2 x 16-digit display.
It shows the program number, sewing lengths, bobbin thread reserve
and piece count. By operating errors or malfunctions the functions are
interrupted and the cause shown by the appropriate error symbol.
The operational readiness of the sewing unit is shown by having the
current parameters in the display. The settings are the same as those
last selected before the machine was switched off.
2.3.1 Display of the 745-22;-23
Display example 1: With selected sewing length
Program number
Selected sewing length
Stored sewing length in mm
Bobbin thread reserve
Piece counter
Display example 2: With programmed length series
Program number
Current sewing length
Stored length in mm
Then stacking
4. Length to be sewn
3. Length to be sewn
(Current sewing distance is underlined)
2. Length to be sewn
1. Length to be sewn
6