Operating instructions

2.3.2 Display of the 745-24
With the
745-24
a symbol for the bias of the corner incisions appears
in the right half of the first line of the display.
Through this symbol the seamstress can establish which bias has
been set for the currently selected program.
The "=====" symbol, for example, denotes straight pocket corners at
the seam beginning and seam end.
Display example 1: With selected sewing length
Bias pocket openings
Selected sewing length
Stored sewing length in mm
Piece counter
Display example 2: With programmed length series
Bias pocket openings
Current sewing length
Stored length in mm
Then stacking
4. Length to be sewn
3. Length to be sewn (here: Light barrier seam)
2. Length to be sewn
(The arrow marks the current sewing length)
1. Length to be sewn
If the display remains blank after the main switch has been turned
on, then the 1,6 A fuse(on the underside of the mains unit) is to be
replaced.
7