Instruction manual

- DA321G5321
- 7 -
2.1 Special Accessories
The special accessories available ex works allow the augmentation and enhancement of functions, operating,
connecting, and mounting options.
Since the range of available components is continually expanded, we kindly ask you to contact us in case of
need.
Designation
Material No.
Control panel Variocontrol V810
5970153
Control panel Variocontrol V820
5970154
Control panel Variocontrol V850
5990159
Control panel Variocontrol V900 (only in conjunction with compiler programming)
5990161
Reflection light barrier module LSM002
6100031
Hall sensor module HSM001
6100032
Pulse encoder IPG001
6100033
Interface EFKANET IF232-USB
7900081
Adapter cord for the connection of light barrier module and/or Hall sensor module
HSM001 and/or pulse encoder IPG001 and/or EFKANET
1113229
Actuating solenoid type EM1.. (for e. g. sewing foot lifting, backtacking, etc.)
Ask for available models
Extension cable approx. 1000 mm long for commutation transmitter DC15..
1113151
Extension cable approx. 1000 mm long for Netz DC15.. line
1113150
Potential equalization cord 700 mm long, LIY 2.5 mm
2
, gray, with spades on both
sides
1100313
Foot control type FB302B with three pedals for standing operation, with approx.
1400 mm connecting cable and plug
4170025
Fitting piece for position transmitter
0300019
Knee switch type KN3 (pushbutton) with cord of approx. 950 mm length without plug
5870013
Knee switch type KN19 (pushbutton) with cord of approx. 450 mm length without
plug
5870021
Undertable mounting kit for DC15..
1113235
Undertable mounting kit (reinforced) for DC15..
1113427
Adapter cord to connect the DA321G... controller as a replacement for the DA82GA
to Dürkopp Adler sewing machine models 367, 381, 382, 467, 767, 768, N291, 8967
1113692
Adapter cord to connect the DA321G... controller to Dürkopp Adler model 467, 767
sewing machines as a replacement for the DA720, DA820
1113777
Adapter cord to connect a knee switch with a 3-pin Hirschmann connector to the
Western connector (RJ11) of the controller
1113693
Sewing light transformer
please indicate line voltage
and sewing light voltage
(6.3V or 12V)
9-contact SubminD male connector
0504135
9-contact SubminD female connector
0504136
Half-shell housing for 9-contact SubminD
0101523
37-contact SubminD male connector, complete
1112900
Single pins for 37-contact SubminD with strand of 50 mm length
1112899