Instruction manual

–
Press the " Σ " key.
Set the number of stitches for stitch condensation at the seam
beginning.
Setting range: 3 - 8 stitches Resolution: 1 stitch
–
Press the " Σ " key.
Set the number of stitches for stitch condensation at the seam end.
Setting range: 3 - 8 stitches Resolution: 1 stitch
–
Press the " Σ " key.
Set the number of stitches for bar tacking at the seam beginning.
Setting range: 3 - 5 stitches Resolution: 1 stitch
–
Press the " Σ " key.
Set the number of stitches for bar tacking at the seam end.
Setting range: 3 - 5 stitches Resolution: 1 stitch
–
Press the " Σ " key.
Set the number of stitches for the thread chain.
Setting range: 1 - 6 stitches Resolution: 1 stitch
–
Press the " Σ " key.
Set the stitch length for stitch condensation.
Setting range: 0.5 - 1.4 mm Resolution: 0.3 mm
–
Press the " Σ " key.
Set the stitch length for sewing.
Setting range: 1.9 - 2.8 mm Resolution: 0.3 mm
–
Press the " Σ " key.
Set the time left anti-remover
Setting range: 1 (100 ms) - 9 (900 ms)
–
Press the " Σ " key.
Set the pulse length anti-remover
Setting range: 1 (100 ms) - 9 (900 ms)
–
Press the " P " key.
The programming mode is ended.
4.3 Setting the Blower Activation Period
The blower activation period for the blowing out of the sewing piece is
set in program 40.
–
Set the " Program " switch to " 40 ".
–
Press the " STOP " key.
The program is activated. The blower activation period appears.
–
Set the desired value with the " + " or " — " key.
Setting range: 01...20 = 0.1...2.0 seconds
12