User`s guide

Installation  19
2.12 Daughter Board Connection
The ACL-8316/12 can be connected with five different daughter boards,
ACLD-8125, ACLD-9137, 9182, 9185, and 9188. The functionality and
connections are specified as follows.
2.12.1 Connect with ACLD-8125
The ACLD-8125 has a 37-pin D-sub connector, which can connect with ACL-
8316/12HG through 37-pin assemble cable. The most outstanding feature of
this daughter board is a CJC ( cold junction compensation) circuit on board.
2.12.2 Connect with ACLD-9137
The ACLD-9137 is a direct connector for the card which is equipped with 37-
pin D-sub connector. This board provides a simple way for connection. It is
very suitable for the simple applications that do not need complex signal
condition before the A/D conversion is performed.
2.12.3 Connect with ACLD-9182
The ACLD-9182 is a 16 channel isolated digital input board. This board is
connected with CN1 of ACL-8316/12 via 20-pin flat cable. The advantage of
board is an 500Vdc isolation voltage is provided, and it can protect your PC
system from damage when an abnormal input signal is occurred.
2.12.4 Connect with ACLD-9185
The ACLD-9185 is a 16 channel SPDT relay output board. This board is
connected with CN2 of ACL-8316/12 via 20-pin flat cable. by using this board,
you can control outside device through the digital output signals.
2.12.5 Connect with ACLD-9188/9138
ACLD-9188 and ACLD-9138 are two general purpose terminal boards for all
the card which comes equipped with 37-pin D-sub connector. ACLD-9188 is
big size and uses Barrier-strip terminal block. The ACLD-9138 is compact
size and uses screw-clamp terminal block.