User`s guide

Software Utility & Calibration • 55
****** cPCI-9116 Function Testing ******
<0> : DI/DO Test
<1> : A/D with Polling Test (ch0~31)
<2> : A/D with Polling Test (ch32~63)
<3> : A/D with Interrupt Test
<4> : A/D with DMA Test
<5> : A/D with DMA & pre-trigger
<6> : A/D with DMA & mn-trigger
<7> : A/D with DMA & post-trigger
<8>: A/D with DMA & delay-trigger with retrigger=3
<9> : A/D with continuous DMA(Double buffer mode)
<Esc>: Quit.
Select 0 to 9 or <Esc> to quit function testing
Figure 24: cPCI-9116 Function Testing Screen
A calibration utility is supported in the software CD that is included in the
product package. The calibration procedures and descriptions can be found in
the utility. Users only need to run the software calibration utility and follow the
procedures.
The 9116 series card is shipped calibrated from the factory. Unless the 9116
card is operating in a very hostile environment with high temperature
fluctuation and vibration, users do not need to calibrate the 9116 series card
when you first receive it.