User's Manual

28
2.3 Setting scan mode
Mode Enable Hands Free Disable Hands Free
One time mode
Press Scan key then release it, align
the scan line to barcode sheet to
get barcode content.
Press and hold Scan key, align the
scan line to barcode sheet to get
barcode content.
Fixed interval
Press Scan key then release it, align
the scan line to barcode sheet to
get barcode content.
The scan engine will be trigger
continuous in each interval of 2
seconds. In this mode, the barcode
data will be not check
Press and hold Scan key, align the
scan line to barcode sheet to get
barcode content.
The scan engine will be trigger
continuous in each interval of 2
seconds. In this mode, the
barcode data will be not check
Ignore same
code
Press Scan key then release it, align
the scan line to barcode sheet to
get barcode content.
The scan engine will be trigger
continuous in each interval of 2
seconds. In this mode, the same
barcode data will be ignoring.
Press and hold Scan key, align the
scan line to barcode sheet to get
barcode content.
The scan engine will be trigger
continuous in each interval of 2
seconds. In this mode, the same
barcode data will be ignoring.
Stop when
success
Press Scan key then release it, align
the scan line to barcode sheet to
get barcode content.
The scan engine will be trigger
continuous in each interval of 2
seconds. The scan engine will stop
to trigger until get the barcode data
successful.
Press and hold scan key, align the
scan line to barcode sheet to get
barcode content.
The scan engine will be trigger
continuous in each interval of 2
seconds. The scan
engine will stop
to trigger until get the barcode
data successful.
Continuous mode
Delay for
same code
Press scan key then release it, the
scan line will continuous trigger,
align the scan line to barcode sheet
to get barcode content. The scan
line will short stop trigger for 0.5
second when get the barcode data.
In this mode the scan trigger will
not stop trigger until press Scan key
again.
Press scan key then release it, the
scan line will continuous trigger,
align the scan line to barcode
sheet to get barcode content. The
scan line will short stop trigger for
0.5 second when get the barcode
data. In this mode the scan trigger
will not stop trigger until press
Scan key again.