User`s manual
Table Of Contents
- M-322
- Revision History
- Preface
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Connectors & Jumpers
- 2.1 Rear I/O Connectors
- 2.2 Onboard Connectors
- Front Panel Audio Pin Header (AAFP)
- ATX 12V Power Connector (ATX12V)
- ATX Power Connector (EATXPWR)
- CD-in Connector (CD)
- System Fan Connector (CHA_FAN1)
- CPU Fan Connector (CPU_FAN)
- Chassis Intrusion Connector (CHASSIS)
- Serial Port Connectors RS-232 (COM2-4)
- Serial Port Connectors RS-422/485 (COM4)
- Floppy Disk Drive Connector (FLOPPY)
- System Panel Pin Header (F_PANEL)
- Amplifier Audio Pin Header (JAMP1)
- Digital IO Pin Header (JDIO)
- IDE Connector (PRI_EIDE)
- Power Fan Connector (PWR_FAN)
- SATA Connectors (SATA1-6)
- S/PDIF Pin Header (SPDIF_OUT)
- SPI Pin Header (SPI)
- USB Pin Headers (USB56/78/910/1112)
- 2.3 Jumpers
- 3 Getting Started
- 4 BIOS Setup
- 4.1 Starting the BIOS
- 4.2 Main Setup
- 4.3 Advanced Setings
- 4.3.1 USB Configuration
- 4.3.2 Trusted Computing
- 4.3.3 Intel TXT Configuration
- 4.3.4 Intel VT-d Configuration
- 4.3.5 CPU Configuration
- 4.3.6 Chipset Settings
- North Bridge Configuration
- 4.4 Power Settings
- 4.5 Boot Settings
- 4.6 Exit Menu
- Appendix A - Watchdog Timer
- Appendix B - System Resources
- Important Safety Instructions
- Getting Service
Getting Started 35
M-322
Intel® Q35 Express Chipset Driver
This section describes the installation of the Intel® Q35 Express
chipset driver.
1. Locate the directory X:\Drv_Chipset_Q35\.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.
Display Driver
Follow these instructions to install the display driver:
1. Locate the directory X:\Drv_VGA_GMA3100\ on the
driver CD and select the correct operating system.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.
Ethernet Driver
Follow these instructions to install the Ethernet driver.
1. Locate the directory
X:\Drv_Lan_RTL8111C\Windows\ on the driver CD and
select the correct operating system.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.
Audio Driver
Follow these instructions to install the audio driver.
1. Locate the audio driver from the directory
X:\Drv_Audio_ALC888\Windows\ on the driver CD and
select the correct operating system.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.