User`s manual

32 Getting Started
3.2 Driver Installation
The MI-110 drivers for Windows XP 32-bit are located in the fol-
lowing directories on the Driver CD, or can be downloaded from
the ADLINK website (http://www.adlinktech.com):
Follow the instructions below to install the required MI-110 drivers:
1. Install the Windows operating system before installing any
driver. Most standard I/O device drivers are installed during
Windows installation.
2. Install the Chipset driver by running the program
X:\MI-110\CHIP\setup.exe. Follow the instructions given and
reboot when instructed.
3. Install the Display driver and utilities by running the program
X:\MI-110\VGA\Win2KXP\win2k_xp14311.exe. Follow the
instructions given and reboot when instructed.
4. Install the LAN driver by running the program
X:\MI-110\LAN\Win2KXP\setup.exe. Follow the instructions
given and reboot if required.
5. Install the Audio driver by running the program
X:\MI-110\Audio\Windows 32_64\WDM_R182.exe. Follow the
instructions given and reboot if required.
6. Install the TPM driver by running the program
X:\MI-110\TPM\setup.exe. Follow the instructions given and
reboot if required.
Chipset X:\MI-110\CHIP\setup.exe
Display X:\MI-110\VGA\Win2KXP\win2k_xp14311.exe
LAN X:\MI-110\LAN\Win2KXP\setup.exe
Audio X:\MI-110\Audio\Windows 32_64\WDM_R182.exe
TPM X:\MI-110\TPM\setup.exe