Specifications

Command Set 3-17

3. 10. Digital Output (Continued)

@Description

Set digital output port channel value at specified address. This

command is only available to modules involving the multiport digital

output function.

@Syntax

#(Addr)(Port)(OutData)<CR> (6056, 6058 only)

# Command leading code. (1-character)

(Addr) Address ID (2-character)

(Port)

Set value to indivisual port

0H: for 6056 channel 14 to 8

0L: for 6056 channel 7 to 0

0A: for 6058 port A

0B: for 6058 port B

0C: for 6058 port C (2-character)

(OutData)

Each bit is mapping to each channel number (2-

character)

* if the port of ND-6058 is in input mode, output data to this port will be

ignore.

@Response

><CR>

?(Addr)<CR>

Command is valid

Command is invalid.

(Addr)

Address ID.

(6056, 6058)