User`s guide

VGA Driver Installation • 67
5.3 Installing the Drivers for Windows NT 4.0
IMPORTANT: You should install the Windows NT 4.0 Service Pack 5 first
before installing the C&T 69000 VGA drivers. If you don't have the
Windows NT 4.0 Service Pack 5, please contact your software vendor or
download it from Microsoft's web site.
The procedures below show you how to install the C&T 69000 VGA drivers
for Windows NT 4.0.
1. Boot Windows NT 4.0.
2. Double click the My Computer icon.
3. Double click the Control Panel icon.
4. Double click the Display" icon.
5. Click Change Display Type.
6. Click Change.
7. Click Have Disk, then insert the diskette/CD containing the C&T
69000 VGA driver for Windows NT 4.0 to the floppy disk drive
/CD-ROM drive, then type in A:\WINNT40 (assuming drive A is your
floppy disk drive) or type in D:\NuPRO\NuPRO595\VGA DRIVER
\WINNT40 (assuming drive D is your CD-ROM drive), and press
Enter.
8. Select Chips Video Accelerator (65545/48/50/54/55 68554
69000), and then click OK.
9. Click Yes to copy the drivers from the floppy disk/CD to the hard disk.
10. When copying is done, click OK.
11. Click Close.
12. Click OK.
13. Windows NT 4.0 will prompt you to restart computer. Click OK to
change the Windows NT configuration.