User`s manual
Table Of Contents
- NuPRO-935A
- Revision History
- Preface
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Hardware Information
- 2.1 Rear Panel I/O Ports
- 2.2 Board Layout
- 2.3 Onboard Connectors
- ATX 12V Power Connector (CN7)
- CPU Fan Connector (FAN2)
- System Fan Connector (FAN1)
- IDE Connector (CN10)
- Floppy disk drive connector (CN8)
- Parallel Port (CN13)
- HD Audio Daughter Board Connector (CN4)
- COM1 Connector (RS-422/485/485+) (CN6)
- COM1/COM2 Connector (RS-232) (CN5/6)
- USB 2.0 Connector (CN11-12)
- External Keyboard/Mouse Connector (CN19)
- Serial ATA Connectors (CN2-3)
- System Panel Connector (CN1)
- 2.4 Jumpers
- 3 Getting Started
- 4 Driver Installation
- 5 BIOS Setup
- Appendix A - Watchdog Timer
- Appendix B System Resources
- Important Safety Instructions
- Getting Service
Introduction 3
NuPRO-935A
Table 1-1: NuPRO-935A General Specifications
Display
VGA • GMA 3100 integrated in Q35 GMCH
VRAM • Shared system memory up to 256 MB
CRT
• External Dsub-15 connector, resolution up to
2048 x 1536 @ 75 Hz
Ethernet
Controller
• Intel® 82566DM and Intel® 82573L
(NuPRO-935A/LV supports 82566DM only)
Ports
• Two RJ-45 Ethernet ports
(NuPRO-935A/LV supports 1x GbE)
Mechanical and Environment
Form Factor • Standard full-size PICMG 1.0 SBC
Dimensions • 338 x 122 mm (L x W)
Operating Temp. • 0ºC to 60ºC
Storage Temp. • -20ºC to 80ºC
Relative Humidity
• 5% to 90% non-condensing both operating and
non-operating
Safety • CE, FCC Class A