User's Manual

DOC#NCP-R4600 GEN2-SOW
(16.8V to 137.5V, EN50155 compliant)
-154V reverse polarity protection
161V(+-2%) over-voltage protection
A TVS diode is fitted between the plus and minus power inputs, there are no
voltage clamping devices between these inputs and the chassis. A standard
1000VAC voltage withstand test with shorted plus – minus is supported.
Ignition input
“Compare Vin_positive with Ignition, IF Ignition >70% of Vin_positive =
System ON, IF Ignition <20% of Vin_positive = System OFF
BIOS will provide Power off delay time option:
5,10,15 minutes.
Input protected to same level as power input
Compliance
Compliant to Interruptions of voltage supply according EN50155 SEC. 5.1.1.4
Class S2 (10ms) by capacitance
Power
Consumption
<80W with 100% CPU loading
Mechanical
Material
Extruded aluminum heatsink with chromate conversion coating cf. MIL-DTL-
81706 B (conductive surface)
Ingress
Protection
IP41
Dimensions 355 mm (W) x 204.5 mm (D) x 66mm(H)
Net Weight
<7kg
Software
BIOS AMI
Watchdog 1~255 sec. system reset
Operating
System
Ubuntu 16.04.6, 64 bit
Debian 10.0.0, 64 bit
Environment
&
Certification
Operating
Temperature
-40°C ~ 70°C (EN50155 TX Class,+85C for 10mins)
Storage
Temperature
-40°C ~ +85°C
Humidity
operating
10% to 95% relative humidity (non-condensing)
Humidity
storage
5% to 95% relative humidity (non-condensing)
EMC
EN50155:2017, EN50121-3-2:2016
EN50124-1:2006, EN61000-4-2:2009
EN61000-4-3:2006 + A1:2008 + A2:2010
EN61000-4-4:2012, EN61000-4-5:2014
EN61000-4-6:2014, EN55022:2006 + A2:2010