User's Manual

24 Getting Started
3.6 Connecting Power
An AC power adapter (19VDC, 65W) is included with the
STC-1005/1205/1505. To connect power to the device, insert the
pluggable terminal block on the end of the power supply into the
DC power inlet as shown below. Secure the terminal block by
tightening the two screws as indicated.
To connect a different DC power supply to the device, loosen the
screws securing the power leads to the terminal block indicated
below and connect the desired power supply with polarity as
shown.
WARNING:
Make sure the power supply is turned OFF when inserting the
terminal block or handling the power leads.