Manual

Installation
•
7
2.3 ACL-6128A's Layout
CN1
CN2
SW1
JP1 JP2
VR4
V
R5
V
R6
JP5
JP6
VR3
VR1
VR2
JP3
JP4
TB1
6128A Isolated 2CH D/A ACRD
VR9
VR7 VR8
JP7
JP8
TB2
VR10
VR11
VR12
JP9
JP10
Figure 2.1 ACL-6128A‘s Layout
2.4 Jumper and DIP Switch Description
You can change the ACL-6128A's channels and base address by setting
jumpers and DIP switches on the card. The card's jumpers and switches are
preset at the factory. Under normal circumstances, these settings should not
need to be changed.
A jumper switch is closed or "shorted" with the plastic cap inserted over two
pins of the jumper. A jumper is open when the plastic cap inserted over one or
no pin(s) of the jumper.