ASD25‐SLC Series 2.5" SATA 6 Gb/s Solid State Drive User's Manual Manual Rev.: Revision Date: Part Number: 1.01 July 6, 2011 50‐1Z072‐1010 Advance Technologies; Automate the World.
Document History 2 Revision Date 1.00 1.
Copyright 2011 ADLINK Technology, Inc. Disclaimer The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Table of Contents 4 1 Introduction .........................................................................5 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Overview................................................................................................. 5 Product Specification................................................................................... 5 Functional Block Diagram ............................................................................11 Product Image ....................................
1 Introduction 1.1 Overview The ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s Solid State Drive (SSD) delivers leading performance in a 2.5" form factor while simultaneously improving system responsiveness for mobile applications over standard rotating drive media or hard disk drives.
1.2.3. Flash: Single‐Level Cell (SLC) component with Toggle‐Mode (32nm ) 1.2.4. Band Performance (CrystalDiskMark) Capacity 32GB (CT/ET) 64GB (CT/ET) 128GB (CT/ET) Access Type MB/s Sequential Read 360MB/s Sequential Write 170MB/s Sequential Read 400MB/s Sequential Write 275MB/s Sequential Read 420MB/s Sequential Write 380MB/s Table 2: Maximum Sustained Read and Write Bandwidth Notes: 1). Performance measured using CrystalDiskMark. 2).
1.2.6. Power on to ready: Type Average Latency Power on to Ready 1s Table 4: Latency Specifications Notes: 1. Write cache enabled 2. Device measured using Drive Master 3. Power on to ready time assumes proper shutdown (Power removal preceded by STANDBY command) 1.2.7. PCMark Vantage Benchmark HDD Score: Bench Mark Score 32GB: 40500 PCMark Vantage HDD Score 64GB: 43500 128GB: 42500 Table 5: PCMark Vantage Benchmark Note: Test computer: 2nd.
1.2.9. Certifications Certification CE compliant Description Indicates conformity with the essential health and safety requirements set out in European Directives Low voltage Directive and EMC Directive Underwriters Laboratories, Inc.
1.2.12. Temperature Environment Ambient Temperature Temperature gradient Humidity Mode Operating Min 0 Non‐operating ‐40 Type Max 70 Unit °C 85 °C Operation 30 °C/hr Non‐operation 30 °C/hr Operation 5 95 % Non‐operation 5 95 % Table 9: Temperature Relative Specifications Note: Measured without condensation 1.2.13.
1.2.15. Electromagnetic Immunity Electromagnetic Immunity tests assume the SSD is properly installed in the representative host system. The drive operates properly without errors degradation in performance when subjected to radio frequency (RF) environments defined in the following table.
1.3 Functional Block Diagram DDR3 DRAM SATA Host Interface Flash Memory Controller NAND Flash Array 1.
1.5 Mechanical Drawing: Dimensions in mm.: 100.0 x 69.8mm x 9.
1.6 Architecture The ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s Solid State Drive (SSD) utilizes a cost effective system‐on‐chip (SoC) design to manage a full SATA 6 Gb/s bandwidth with the host while managing multiple flash memory devices on multiple channels internally. 1.7 Hot Plug Support Hot Plug insertion and removal are supported when the correct connector and an appropriate operating system (OS) are used as described in the SATA 3.0 Specification.
2 Pin Locations and Signal Descriptions 2.1 Pin Locations The data and power connector pin locations of the ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s SSD are as shown below. 2.
Power Connector: Name P1 Type V33 Description 3.3V Power P2 V33 3.3V Power P3 V33 3.3V Power, Pre‐change P4 GND P5 GND P6 GND P7 V5 5V Power, Pre‐change P8 V5 5V Power P9 V5 5V Power P10 GND P11 DAS/DSS P12 GND P13 V12 12V Power, Pre‐change P14 V12 12V Power P15 V12 12V Power Device Activity Signal / Disable Staggered Spinup Table 14: Serial ATA Power Connector Pin Definitions Note: 1. All pins are in a signal row, with a 1.27mm (0.05”) pitch 2.
3 ATA Command Sets 3.1 ATA Command The ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s SSD supports all the mandatory ATA commands defined in the ATA/ATAPI‐8 specification. 3.1.1. ATA General Feature Command Set The ASD25‐SLC 2.
3.1.2. Identify Device Data The following table details the sector data returned after issuing an IDENTIFY DEVICE command.
Word F=Fixed V=Variable X=Both Default Value Description 64 F 0007h Multi‐word DMA modes supported/selected 65 F 0003h PIO modes supported 66 F 0078h 67 F 0078h 68 F 0078h 69‐70 F 0078h 71‐74 F 0h 75 F 0h 76 F 001Eh Queue depth 77 F 0106h Serial ATA capabilities 78 F 0h Reserved for future Serial ATA definition 79 F 0048h Serial ATA features supported 80 V 0040h Serial ATA features enabled 81 F 00FCh Major Version Number 82 F 001Ah Minor Version N
Word F=Fixed V=Variable X=Both Default Value Description 95 V 0h Vendor’s recommended and actual acoustic management value 96 F 0h Stream Minimum Request Size 97 V 0h Streaming Transfer Time ‐ DMA 98‐99 V 0h Streaming Access Latency ‐ DMA and PIO 100‐103 F 0h Streaming Performance Granularity 125,045,424 (64GB) Maximum user LBA for 48‐bit Address feature set 104 V 105 106 V 0h Streaming Transfer Time ‐ PIO 107 F 0h Reserved 108‐111 F 4000h Physical sector size/logical se
Word F=Fixed V=Variable X=Both Default Value Description 235 F 0h Reserved 236‐254 0001h Reserved 255 02A0h Reserved 236‐254 F 0h Reserved 255 X varies Integrity word (checksum and signature) Table 15: Returned Sector Data Notes: 1. F=Fixed. The content of the word is fixed and does not change for removable media devices, these values may change when media is Removed or changed. 2. V=Variable.
3.3 Security Mode Feature Set The ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s SSD supports the Security Mode command set, which consist of ．SECURITY SET PASSWORD ．SECURITY UNLOCK ．SECURITY ERASE PREPARE ．SECURITY ERASE UNIT ．SECURITY FREEZE LOCK ．SECURITY DISABLE PASSWORD 3.4 SMART Command Set The ASD25‐SLC 2.
Subcommand Code SMART ATTRIBUTE VALUES (READ DATA) D0h READ ATTRIBUTE THRESHOLDS D1h ENABLE/DISABLE ATTRIBUTE AUTOSAVE D2h SAVE ATTRIBUTE VALUES D3h EXECUTE OFF‐LINE IMMEDIATE D4h LBA Low value EXECUTE SMART OFF‐LINE ROUTINE 00h EXECUTE SMART SHORT SELF‐TEST ROUTINE (OFFLINE) 01h EXECUTE SMART EXTENDED SELF‐TEST ROUTINE (OFFLINE) 02h ABORT OFF‐LINE ROUTINE 7Fh EXECUTE SMART SHORT SELF‐TEST ROUTINE (CAPTIVE) 81h EXECUTE SMART EXTENDED SELF‐TEST ROUTINE ( CAPTIVE ) 82h READ LOG SECTOR
3.6 48‐Bit Address Command Set The ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s SSD supports the Host Protected Area command set, which consists of ．READ NATIVE MAX ADDRESS ．FLUSH CACHE EXT ．READ DMA EXT ．READ NATIVE MAX ADDRESS EXT ．READ SECTOR(S) EXT ．READ VERIFY SECTOR(S) EXT ．SET MAX ADDRESS EXT ．WRITE DMA EXT ．WRITE MULTIPLE EXT ．WRITE SECTOR(S) EXT 3.7 Device Configuration Overlay Command Set The ASD25‐SLC 2.
4 SATA Command Sets 4.1 SATA Command The SATA 3.0 specification is a super set of the ATA/ATAPI‐8 specification with regard to supported commands. The ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s SSD supports the following features which are unique to SATA Specification. 4.1.1. Software Settings Preservation The ASD25‐SLC 2.5" industrial grade series SATA 6 Gb/s SSD supports the SET FEATURES parameter to enable/disable the preservation of software settings. 4.1.2.
5 References This document references standards defined by a variety of organizations as listed below. Date Title Location http://www.vcci.or.jp/vcci_e/general/ join/index.html Dec 2008 VCCI July 2007 ROHS Search for material description datasheet at http://intel.pcnalert.com July 2007 SFF‐8144, 1.8” drive form factor http://www.sffcommittee.org February 2007 Serial ATA Revision 2.6 http://www.sata‐io.org May 2006 SFF‐8223, 2.5” Drive w/Serial Attachment Connector http://www.sffcommittee.
6 Getting Service Contact us should you require any service or assistance. ADLINK Technology, Inc. Address: 9F, No.166 Jian Yi Road, Zhonghe District New Taipei City 235, Taiwan 新北市中和區建一路 166 號 9 樓 Tel: +886-2-8226-5877 Fax: +886-2-8226-5717 Email: service@adlinktech.com Ampro ADLINK Technology, Inc. Address: 5215 Hellyer Avenue, #110, San Jose, CA 95138, USA Tel: +1-408-360-0200 Toll Free: +1-800-966-5200 (USA only) Fax: +1-408-360-0222 Email: info@adlinktech.com ADLINK Technology (China) Co., Ltd.
ADLINK Technology (Europe) GmbH Address: Nord Carree 3, 40477 Duesseldorf, Germany Tel: +49-211-495-5552 Fax: +49-211-495-5557 Email: emea@adlinktech.com ADLINK Technology, Inc. (French Liaison Office) Address: 15 rue Emile Baudot, 91300 Massy CEDEX, France Tel: +33 (0) 1 60 12 35 66 Fax: +33 (0) 1 60 12 35 66 Email: france@adlinktech.com ADLINK Technology Japan Corporation Address: 〒101-0045 東京都千代田区神田鍛冶町 3-7-4 神田 374 ビル 4F KANDA374 Bldg.
