User guide

64
6.3.8 ADLINK IPMI settings
You can use this screen to select options for the ADLINK IPMI settings. Use the up
and down < Arrow > keys to select an item. Use the < + > and < - > keys to change
the value of the selected option. A description of the selected item appears on the
right side of the screen. The settings are described on this page. The screen is
shown below.
POST Watchdog Timer
Enable or Disable POST Watchdog Timer. Set this value to Enabled / Disabled.
POST Watchdog Timeout
Select the time value for POST Watchdog Timer Expiration value.
Set this value to 3 minutes / 4 minutes /5 minutes /6minutes.
POST Watchdog Timer Policy
Configure how the system should respond if the POST Watchdog Timer expires. Not
available if POST Watchdog Timer is disabled.
Set this value to Reset / Power Down / Do Nothing.
OS Load Watchdog Timer
Enable or Disable OS Watchdog Timer. Set this value to Enabled / Disabled.