Owner manual

aTCA-RN720 User's Guide
38
 Deactivate
Figure 7-3 Deactivate Procedure
⒮ Shelf manager sends Deactivate to IPMC.
① IPMC sends Deactivate to LMP via PAYLOAD Interface (UART).
② LMP completes the operation and sends the completion message via PAYLOAD Interface
(UART) to IPMC.
③ IPMC initiates Power Down sequence to power off Front Blade and RTM.
Table 7-3 Signals: Deactivate Procedure
Signal name Status
PAYLOAD Interface
P5(4),P5(5)
Deactivate Command
- IPMI Message
Deactivate Done Indicator
- IPMI Message
 Activate
Figure 7-4 Activate Procedure
⒮ Shelf manager sends Active Command to IPMC.
① IPMC initiates Power ON sequence to power ON Front Blade and RTM.
Table 7-4 Signals: Activate Procedure
Signal name Status
PAYLOAD Interface
P5(4),P5(5)
Activate Command
- IPMI Message
Deactivate Done Indicator
- IPMI Message