Owner manual

aTCA-RN720 User's Guide

 Shutdown triggered by LMP

Power OFF

IPMC

LMP

UART#1

Power

Sequence

P5(5)

Figure 7-7 Shutdown Procedure

⒮ LMP sends Shutdown Command to IPMC via PAYLOAD Interface (UART).

① IPMC initiates Power Down sequence to turn off Blade and RTM power.

Table 7-7 Signals: Shutdown Procedure

Signal name Status

PAYLOAD Interface

P5(4),P5(5)

Shutdown Command

- IPMI Message

 RTM Shutdown triggered by LMP

Figure 7-8 RTM Shutdown Procedure

⒮ LMP sends RTM Shutdown to IPMC via PAYLOAD Interface (UART).

① IPMC sends RTM Power OFF to MMC via IPMB-L.

② MMC completes RTM Power OFF operation and sends the completion message to IPMC.

③ IPMC turns off RTM Power 12V.

④ IPMC sends RTM Disable information to LMP via PAYLOAD Interface (UART).