Owner's manual

•

Installation

2.3 Installation Procedure

1. Turn off your computer

2. Turn off all accessories (printer, modem, monitor, etc.) connected to

computer.

3. Remove the cover from your computer.

4. Select a 32-bit PCI expansion slot.

Caution! Don‘t put PCI card into ISA or EISA slot.

5. Before handling the serial communication card, discharge any static

buildup on your body by touching the metal case of the computer.

Hold the edge and do not touch the components.

6. Position the board into the PCI slot you selected.

7. Secure the card in place at the rear panel of the system unit using

screw removed from the slot.