Instruction Manual

2Introduction

X VGA port on front or switchable to rear I/O by BIOS setting

X Two PCIe Gigabit Ethernet egress ports

X Additional two Gigabit Ethernet ports on 80mm RTM

(cPCI-R3P00T)

X One CompactFlash socket

X Optional CFast socket for SATA interface storage (shares CF

socket site)

X Line-in and Line-out ports on front panel

X 2.5" SATA drive onboard on 8HP/12HP versions at 6 Gb/s

1.3 Model Number Decoder

Blades

(A) Operating Temperature Code

Z Blank = 0ºC to +60ºC

Z ET = -20ºC to +70ºC (for CPUs with TDP below 25W only)

(B) J2 Connector Type Code

Z 0 = HM connector

Z 1 = UHM connector (PICMG 2.30 PlusIO compliant)

Z Blank = Single slot width with CF socket, 2x USB, 2x GbE,

VGA

Z D = Dual slot width with CF socket, 2x USB, 2x GbE, VGA

on layer-1; 2x USB, COM, PS/2 KB/MS, Line-in, Line-out

and SATA on layer-2 DB-3610L2

Z G = Dual slot width with CF socket, 2x USB, 2x GbE, VGA

on layer-1, 2x DisplayPort, RJ-45 COM, PS/2 KB/MS, USB

and SATA on layer-2 DB-3970L2

cPCI-ET3970 D / 655L / M4G

(A) (B)(C) (D) (E)