Owner manual

48 Board Interfaces
COM1/Debug Switch (SW8)
Switch SW8 sets the COM1 serial port as a standard RS-232
serial port or as an IPMI debugging port.
Table 4-25: COM1/Debug Switch Settings
COM1 Mode Selection Switches (SW9,SW10)
Switch SW9 sets the COM1 serial port to RS-232 or
RS-422/485 mode and SW10 sets COM1 to RS-422 or RS-485
mode. When the SW9 is set to RS-232 mode, SW10 has no
function.
Table 4-26: COM1 Mode Selection Switch SW9 Settings
Table 4-27: COM1 Mode Selection Switch SW10 Settings
Mode 1 2 3 4
RS-232 COM port (default) ON ON OFF OFF
IPMI debugging port OFF OFF ON ON
Mode 1 2
RS-232 (default) Not Used ON
RS-422/485 Not Used OFF
Mode 1 2
RS-485 Not Used ON
RS-422 Not Used OFF
ON
1 2
3 4
ON
1
2
3
ON
1 2