Manual

IPMI User Guide 89
cPCI-6510
OemReportGeoAddress
This command can report the IPMB address, the GA pin input sta-
tus, and the event forwarding control value.
OemEnableSmbus
This command is used to turn on the I2C bus when it is off during
boot up process. Usually BIOS will perform this command after
booting in boards with ServerWorks chipset.
OemDisableSmbus
This command is used to shut down I2C bus access.
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F0h OEM defined command
Response
0 Complete Code 00h means OK
1 IPMB address IPMB address value
2 GA value GA pin input status
3 Control value Current control value of event forwarding
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F2h OEM defined command
Response 0 Complete Code 00h means OK
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F3h OEM defined command
Response 0 Complete Code 00h means OK