Manual

2Overview

1.2 Features

X 6U CompactPCI SBC in 4HP width form factor

X µFC-BGA package Intel® Core™ i7 processor, up to 2.53GHz

X Mobile Intel® BD82QM57 PCH (Platform Controller Hub)

X Dual Channel DDR3 ECC SDRAM at 800 or 1066MHz sol-

dered onboard, up to 8GB

X 64-bit/66MHz CompactPCI Interface based on PCI specifica-

tions, 3.3V and 5V signaling

X Supports operation in system slot as system master or in

peripheral slot with connectivity to CompactPCI bus* (optional

isolation from CompactPCI bus)

X Dual PMC sites with 64-bit/133MHz PCI bus

X Single XMC site with PCIe x8 lane (shared with inner PMC

site)

X Up to two DVI ports for dual independent displays

X Four PCIe Gigabit Ethernet ports, two at front, two for PICMG

2.16 or RTM

X Onboard CompactFlash socket

X 2.5” SATA HDD direct connector onboard, occupies outer PMC

site

X Up to -40°C to 80°C optional extended temperature support

X RTM models available with multiple I/O options: SATA, HD

audio, COM, USB, Gigabit Ethernet, PS/2 KB/MS, PIM, SAS,

SCSI, CF, SD socket

X Hardware RAID on SCSI, SAS interfaces supported (depen-

dent on RTM module)

NOTE:

*See “Programming NT Mode EEPROM Map” on page 59 for

instructions on how to set the PCIe-to-PCI bridge on the

cPCI-6510 to NT-mode to allow operation in a peripheral slot.