Instruction Manual

8 Specifications

Serial Ports Four16C550 serial ports

• One DB-9 RS-232/422/485 serial port on front panel

• Three serial ports routed to rear I/O through J3 (1x RS-

232/422/485, 2x TX/RX only)

PCI Express • PCIe x16 Gen2 to J4

• PCIe x4 Gen2 to J5

USB 2.0 • Six USB 2.0 ports routed to J3

USB 3.0 • Three USB 3.0 ports on front panel, one to J5

KB/MS • PS/2 Keyboard/Mouse port to J3

Audio • High Definition Audio signals routed to J3

TPM Atmel AT97SC3204 TPM (upon request)

• Over/Under voltage detection

• Low/High frequency sensor/filter

• Reset filter

• Memory Encryption/Decryption

Storage

Interfaces

• One SATA 6 Gb/s direct connector for 2.5" onboard drive

(removable)

• One SATA 6 Gb/s CFast slot by adapter board

• Three SATA 3Gb/s to rear IO

Faceplate I/O • 2x 10/100/1000BASE-T Ethernet ports

• 1x DVI-I (RGB switchable to rear)

• 3x USB 3.0 ports

• 1x RJ-45 RS-232/422/485 port

Compatibility

• Microsoft Windows 7 32/64-bit

• Red Hat Enterprise Linux 6.2 x86 64-bit

• Fedora 16 x86 64-bit

• Wind River VxWorks 6.9 BSP

• Other OS support on request

Environmental • Operating Temperature

Standard: 0 to 60°C with forced air flow

ETT: -20°C to 70°C with forced air flow (cPCI-ET6520)

EX: -40°C to 85°C with forced air flow (Core™ i7-3555LE &

Core™ i7-3517UE only)

• Storage Temperature: -40°C to 85°C

• Humidity: 95% non-condensing

• Shock: 15G peak-to-peak, 11ms duration, non-operating

•Vibration

: Operating 2 Grms, 5-500Hz, each axis w/o hard

drive

EMI • CE EN55022

• FCC Class A

Table 2-1: cPCI-6525 Blade Specifications