cPCI-6530 Series Performance 6U CompactPCI® Intel® Core™ i7/i5 Processor Blade User’s Manual Manual Rev.: 1.00 preliminary Revision Date: December 30, 2013 Part No: 50-15096-1000 Advance Technologies; Automate the World.
Revision History ii Revision Release Date 1.
cPCI-6530 Preface Copyright 2013 ADLINK Technology Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.
Using this Manual Audience and Scope The cPCI-6530 User’s Manual is intended for hardware technicians and systems operators with knowledge of installing, configuring and operating industrial grade single board computers. Manual Organization This manual is organized as follows: Chapter 1, Introduction: Introduces the cPCI-6530, its features, block diagrams, and package contents. Chapter 2, Specifications: Presents detailed specification information, power consumption, and technical drawings.
cPCI-6530 Conventions Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly. Additional information, aids, and tips that help users perform tasks. NOTE: CAUTION: WARNING: Preface Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.
This page intentionally left blank.
cPCI-6530 Table of Contents Revision History...................................................................... ii Preface .................................................................................... iii List of Figures ........................................................................ ix List of Tables.......................................................................... xi 1 Introduction ........................................................................ 1 1.1 Overview.........
4.3 cPCI-6530 Series Front Panel ........................................... 21 4.4 Connector Pin Assignments............................................... 23 Important Safety Instructions............................................... 39 Getting Service ......................................................................
cPCI-6530 List of Figures Figure 2-1: Figure 4-1: Figure 4-2: Figure 4-3: cPCI-6530 Blade Functional Block Diagram.................... 8 cPCI-6530V Series Board Layout.................................. 19 cPCI-6530 Series Board Layout .................................... 20 cPCI-6530 Series Front Panel Layout ...........................
This page intentionally left blank.
cPCI-6530 List of Tables Table 2-1: Table 2-2: Table 4-1: Table 4-2: Table 4-3: Table 4-4: Table 4-5: Table 4-6: Table 4-7: Table 4-8: Table 4-9: Table 4-10: Table 4-11: Table 4-12: Table 4-13: Table 4-14: Table 4-15: Table 4-16: Table 4-17: Table 4-18: List of Tables cPCI-6530 Processor Blade Specifications ..................... 5 cPCI-6530 I/O Connectivity ............................................. 9 cPCI-6530 Front Panel System LED Descriptions ........ 22 USB 2.0 Pin Definition ...................
This page intentionally left blank.
cPCI-6530 1 Introduction 1.1 Overview The ADLINK cPCI-6530 Series is a 6U CompactPCI® processor blade with soldered DDR3L-1600 ECC memory up to 8GB and DDR3L-1600 ECC socket type memory up to 8GB. The ADLINK cPCI-6530 features an Intel® Core™ i7/i5 processor with Mobile Intel® QM87 Express Chipset. The cPCI-6530 Series is a 6U CompactPCI blade in single-slot (4HP) width form factor. Front panel I/O for the cPCI-6530V includes 1x DVI-I, 2x GbE and 2x USB 3.0 ports, 1x USB 2.
blade in the host slot. Internet remote manageability includes IPMI for system health monitoring over Internet and a GbE port on the faceplate supports Intel® AMT 9.0 for remote monitoring. 1.2 Features 2 X 6U CompactPCI blade in 4HP width form factor X Intel® Core™ i7-4700EQ Processor (4 cores, 8 threads, 6M cache, 2.
cPCI-6530 1.3 Package Contents The cPCI-6530 is packaged with the following components. If any of the following items are missing or damaged, retain the shipping carton and packing material and contact the dealer for inspection. Please obtain authorization before returning any product to ADLINK. The packing contents of cPCI-6530 Series non-standard configurations will vary depending on customer requests.
This page intentionally left blank.
cPCI-6530 2 Specifications 2.1 cPCI-6530 Processor Blade Specifications CompactPCI® Standards • • • • PICMG® 2.0 CompactPCI® Rev. 3.0 PICMG® 2.1 Hot Swap Specification Rev. 2.0 PICMG® 2.9 System Management Rev. 1.0 PICMG® 2.16 Packet Switching Backplane Rev. 1.0 Mechanical • • • • Standard 6U CompactPCI® Board size: 233mm x 160mm Single slot (4HP, 20.32mm) CompactPCI® connectors: J1, J2, J3, J4, J5 Processor • Intel® Core™ i7-4700EQ Processor, 2.4 GHz (3.
Serial Ports • Up to three serial ports • One RS-232/422/485 serial port on front panel (cPCI-6530V) • Up to two RS-232/422/485 COM port routed to RTM USB 2.0 • One USB 2.0 port on front panel • Up to six USB 2.0 ports routed to rear transition module USB 3.0 • One USB 3.0 for cPCI-6530 version, additional one USB 3.
cPCI-6530 OS Compatibility • • • • • • Microsoft Windows 7 32/64-bit Microsoft Windows 8 32/64-bit Red Hat Enterprise Linux 6.4, 64-bit Fedora 14, 32-bit VxWorks 6.
2.2 Block Diagrams GbE1 USB1 USB2 USB3 GbE2 DVI-I Front Panel COM1 cPCI-6530 Blade COM1 Intel I217 ECC SO-CDIMM, max. 8GB VGA DVI Soldered w/ ECC, max. 8GB BIOS SPI Intel I210 2x USB 3.0 USB 2.
cPCI-6530 2.3 I/O Connectivity Table Function cPCI-6530V (4HP) Faceplate Gigabit Ethernet cPCI-6530 (4HP) Onboard Faceplate Onboard Y x2 – Y x2 – Y (RJ-45) – – – USB 3.0 Y x2 – Y x1 – USB 2.0 Y x1 – Y x1 – Y – – – – Y x2 (one for 2.5” drive & one 7-pin SATA connector) – Y x1 (7-pin SATA connector) – Y (space shared with 2.
2.4 Power Requirements In order to guarantee a stable functionality of the system, it is recommended to provide more power than the system requires. An industrial power supply unit should be able to provide at least twice as much power as the entire system requires of each voltage. An ATX power supply unit should be able to provide at least three times as much power as the entire system requires of each voltage. The tolerance of the voltage lines described in the CompactPCI specification (PICMG 2.0 R3.
cPCI-6530 Power Consumption This section provides information on the power consumption of cPCI-6530 Series when using the Intel® Core™ i7 processors with 8GB DDR3L-1600 ECC soldered memory and 8GB DDR3L-1600 socket memory module. Storage device is used with ADLINK ASD26-MLC32G-CT 32GB SATA SSD. The cPCI-6530 is powered by 5V and 3.3V. Power consumption at 100% CPU stress was measured using the Intel Thermal Analysis Tool 4.3 (TAT).
This page intentionally left blank.
cPCI-6530 3 Functional Description The following sections describe the cPCI-6530 Series features and functions. 3.1 Processors The Mobile 4th Generation Intel® Core™ Processor Family are state of the art, 64-bit, multi-core mobile processor built on 22 nanometer process technology. Based on a new micro-architecture, the processor is designed for a two-chip platform. The two-chip platform consists of a processor and Platform Controller Hub (PCH).
Supported Technologies Features Core™ i7-4700EQ Core™ i5-4402E Intel® Virtualization Technology for Directed I/O (Intel® VT-d) Yes Yes Intel® Virtualization Technology (Intel® VT-x) Yes Yes Intel® VT-x with Extended Page Tables (EPT) Yes — Intel® Hyper-Threading Technology Yes Yes Intel® 64 Architecture Yes Yes Execute Disable Bit Yes Yes Intel® Turbo Boost Technology 2.
cPCI-6530 Graphics The Intel® HD Graphics 4600 is integrated in the processor enabling substantial gains in performance and lower power consumption. X DX11.1 support X OpenGL 3.2, OpenCL 1.2 support X Graphics Base Frequency: 400 MHz X Graphics Max Dynamic Frequency: 1 GHz X Supports Intel® InTru™ 3D Technology X FDI carries display traffic from the Processor Graphics in the processor to the legacy display connectors in the PCH 3.
X Integrated Clock Controller X Analog and Digital Display ports X Low Pin Count (LPC) interface X Firmware Hub (FWH) interface support X Serial Peripheral Interface (SPI) support 3.3 PMC/XMC The cPCI-6530(V) models support max two PMC or XMC sites for front panel I/O expansion. The PMC site provides a maximum 64-bit/33,66,133 MHz PCI bus link using a Pericom PI7C9X130 PCI-Express-to-PCI bridge and PCI-Express x4 link. The PMC sites support +3.3V signaling only.
cPCI-6530 shared, each logical processor has its own architectural state with its own set of general-purpose registers and control registers. This feature must be enabled using the BIOS and requires operating system support. Intel recommends enabling Hyper-Threading Technology with Microsoft Windows 7, Vista, and XP, and disabling Hyper-Threading Technology using the BIOS for all previous versions of Windows operating systems. 3.
3.7 Battery The cPCI-6530 is equipped with a 3.0V "coin cell" lithium battery for the Real Time Clock (RTC). The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer. A Rayovac BR2032 is equipped on board by default.
cPCI-6530 4 Board Interfaces This chapter illustrates the board layout, connector pin assignments, and jumper settings to familiarize users with the cPCI-6530 Series. 4.
4.2 cPCI-6530 Board Layout CN3 CN9 JN5 JN6 JN7 PCH1 J5 J4 CN2 JN1 JN2 CN1 J3 U23 JN3 JN4 J2 CN14 CN13 U34 CN10 CPU1 U27 J1 LAN1 CPU Intel® Core™ Processor J1~5 CompactPCI connectors PCH1 Intel® QM87 PCH LAN1 Dual Ethernet connectors CN1 Memory socket CN9 mSATA connector CN2/3 XMC connectors CN10 SATA 7-pin connector CN13 USB 3.0 connector U34 PCe Switch PEX8624-BB50BI CN14 USB 2.
cPCI-6530 4.3 cPCI-6530 Series Front Panel Front Panel Layout cPCI-6530V DVI USB 3.0 Serial Port USB 2.0/3.0 GbE A/B PMC/XMC GP LED Power LED Reset Button HotSwap HDD LED WDT LED cPCI-6530 PMC/XMC PMC/XMC USB 2.0/3.
System LEDs LED Color Power Green/ Red WDT Orange HDD Blue Condition OFF System is off Red System Power ready (PWGD) Green Post OK OFF No Watchdog event Blinking Watchdog event alert OFF No CF/CFast/SATA HDD activity Blinking Data read/write in process for CF/CFast/ SATA HDD Off Handles closed, system is on Fast Blink Preparing to shut down system (LED: 0.1s on, 0.9s off.) On Handles open and blade ready to be removed Slow Blink Voltages out of tolerance: 3.3V, 5V, 12V, 1.
cPCI-6530 4.4 Connector Pin Assignments USB 2.0 Connectors Pin # Signal Name 1 Vcc 2 UV0- 3 UV0+ 4 GND Table 4-2: USB 2.0 Pin Definition USB 3.0 Connectors Board Interfaces Pin # Signal Name 1 USB3.
DVI-I Connector Pin # Signal Pin # Signal 1 TMDS Data2- 16 Hot Plug Detect 2 TMDS Data2+ 17 TMDS Data0- 3 GND 18 TMDSData0+ 4 NC 19 GND 5 NC 20 NC 6 DDC Clock [SCL] 21 NC 7 DDC Data [SDA] 22 GND 8 Analog vertical sync 23 TMDS Clock + 9 TMDS Data1- 24 TMDS Clock - 10 TMDS Data1+ C1 Analog Red 11 GND C2 Analog Green 12 NC C3 Analog Blue 13 NC C4 Analog Horizontal Sync 14 +5 V Power C5 Analog GND Return 15 GND Table 4-3: DVI-I Connector Pin Definiti
cPCI-6530 RJ-45 Gigabit Ethernet Connectors Pin # 10BASE-T/ 100BASE-TX 1000BASE-T 1 TX+ LAN_TX0+ 2 TX- LAN_TX0- 3 RX+ LAN_TX1+ 4 — LAN_TX2+ 5 — LAN_TX2- 6 RX- LAN_TX1- 7 — LAN_TX3+ 8 — LAN_TX3- Table 4-4: RJ-45 GbE Pin Definitions Speed 8 Activity 1 Status Speed LED (Green/Orange) Activity LED (Yellow) Network link is not established or system powered off OFF OFF OFF ON Active OFF Blinking Link Green ON Active Green Blinking Link Orange ON Active Orange
COM (RJ-45) Pin # RS-232 RS-422 RS-485 1 DCD# TX- Data- 2 RTS# — — 3 DSR# — — 4 TXD RX+ — 5 RXD TX+ Data+ 6 GND — — 7 CTS# — — 8 DTR#L RX- — 8 1 Table 4-6: Front Panel COM Pin Definitions COM RJ-45 to DB-9 Cable Pin # RS-232 RS-422 RS-485 1 DCD# TX- Data- 2 RXD TX+ Data+ 3 TXD RX+ — 4 DTR#L RX- — 5 GND — — 6 DSR# — — 7 RTS# — — 8 CTS# — — 9 — — — 1 6 5 Table 4-7: COM RJ-45 to DB-9 Cable Pin Definitions 26 Board Interfaces
cPCI-6530 Serial ATA 7-pin Connector (CN10) Pin # Signal 1 2 3 4 5 6 7 GND TX+ TXGND RXRX+ GND 1 7 Table 4-8: Serial ATA 7-pin Connector Pin Definition Serial ATA Connector with Power Pin # Signal S1 GND S2 TX+ S3 TX- S4 GND S5 RX- S6 RX+ S7 GND P1 NC P2 NC P3 NC P4 GND P5 GND P6 GND P7 5V P8 5V P9 5V P10 GND P11 NC P12 GND P13~P15 NC S1 Signal S7 P1 Power P15 Table 4-9: Serial ATA Connector with power Pin Definition Board Interfaces 27
SATA Board-to-Board Connector (CN11) Signal Name Pin # Pin # Signal Name GND 1 2 GND GND 3 4 GND GND 5 6 GND GND 7 8 GND GND 9 10 GND GND 11 12 GND GND 13 14 GND GND 15 16 GND GND 17 18 GND GND 19 20 GND GND 21 22 GND GND 23 24 GND GND 25 26 GND GND 27 28 GND GND 29 30 GND P3V3 31 32 P5V P3V3 33 34 P5V P3V3 35 36 P5V P3V3 37 38 P5V NC 39 40 P12V CFAST_CDI 41 42 P12V CFAST_CDO 43 44 P12V GND 45 46 GND GND 47 48
cPCI-6530 CFast Socket (on optional DB-CFAST) Pin # Signal Name Ground S1 SATA_TX-P S2 SATA_TX-N S3 Ground S4 SATA_RX-N S5 SATA_RX-P S6 Ground S7 CFast_CDI P1 Ground P2 NC P3 NC P4 NC P5 NC P6 Ground P7 CFast_LED1 P8 CFast_LED2 P9 NC P10 NC P11 NC P12 P3V3 P13 P3V3 P14 Ground P15 Ground P16 CFast_CDO P17 1 24 P1 S1 Table 4-11: CFast Socket Pin Definition Board Interfaces 29
PMC Connector (JN1/5, JN2/6, JN3/7, JN4) Pin# JN1/5 Signal JN2/6 Signal JN3/7 Signal JN4 Signal 1 PMC_TCK P12V NC PIO1 2 N12V PMC_TRST-L GND PIO2 3 GND PMC_TMS GND PIO3 4 PCIX_INTA-L NC (PMC_TDO) PCIX_CBE-L7 PIO4 5 PCIX_INTB-L PMC_TDI PCIX_CBE-L6 PIO5 6 PCIX_INTC-L GND PCIX_CBE-L5 PIO6 7 PMC_MOD-L1 GND PCIX_CBE-L4 PIO7 PIO8 8 P5V NC GND 9 PCIX_INTD-L NC PMC_VIO PIO9 10 NC NC PCIX_PAR64 PIO10 11 GND PMC_MOD-L2 PCIX_AD63 PIO11 12 P3V3_PMCAUX P3V3 P
cPCI-6530 Pin# JN1/5 Signal JN2/6 Signal JN3/7 Signal JN4 Signal 34 GND NC PCIX_AD48 PIO34 35 GND PCIX_TRDY-L PCIX_AD47 PIO35 36 PCIX_IRDY-L P3V3 PCIX_AD46 PIO36 37 PCIX_DEVSEL-L GND PCIX_AD45 PIO37 38 P5V PCIX_STOP-L GND PIO38 39 PCIX_PCIXCAP PCIX_PERR-L GND PIO39 40 PCIX_LOCK-L GND PCIX_AD44 PIO40 41 NC P3V3 PCIX_AD43 PIO41 42 NC PCIX_SERR-L PCIX_AD42 PIO42 43 PCIX_PAR PCIX_CBE-L1 PCIX_AD41 PIO43 44 GND GND GND PIO44 45 PMC_VIO PCIX_AD14 GND
XMC Connector (CN2) Pin# A B C D E F 1 RXP RXN 3.3V NC NC VPWR 2 GND GND Not used GND GND PCIE_RST-L 3 NC NC 3.3V NC NC VPWR 4 GND GND Not used GND GND Not used 5 NC NC 3.3V NC NC VPWR 6 GND GND Not used GND GND +12V 7 NC NC 3.3V NC NC VPWR 8 GND GND Not used GND GND -12V 9 NC NC Not used NC NC VPWR 10 GND GND Not used GND GND GA0 11 TXP TXN Not used NC NC VPWR 12 GND GND GA1 GND GND Not used 13 NC NC 3.
cPCI-6530 CompactPCI J1 Connector Pin Z A B C D E F 25 GND +5V REQ64# ENUM# +3.
CompactPCI J2 Connector Pin Z A B C D E F 22 GND 21 GND GA4 GA3 GA2 GA1 GA0 GND CLK6 GND NC NC NC GND 20 GND CLK5 GND NC GND NC GND 19 GND GND GND IPMB_DAT IPMB_CLK NC GND 18 GND NC NC NC GND NC GND 17 GND NC GND J2_RSTBTN-L REQ6# GNT6# GND 16 GND NC NC DEG# GND NC GND 15 GND NC GND CPCI_FAL-L REQ5# GNT5# GND 14 GND CPCI_AD35 CPCI_AD34 CPCI_AD33 GND CPCI_AD32 GND 13 GND CPCI_AD38 GND GND CPCI_AD37 CPCI_AD36 GND 12 GND
cPCI-6530 CompactPCI J3 Connector Pin Z 19 GND A B C P5V P5V D E F P12V P5V P5V GND 18 GND LAN3_TXDP0 LAN3_TXDN0 GND LAN3_TXDP2 LAN3_TXDN2 GND 17 GND LAN3_TXDP1 LAN3_TXDN1 GND LAN3_TXDP3 LAN3_TXDN3 GND 16 GND LAN4_TXDP0 LAN4_TXDN0 GND LAN4_TXDP2 LAN4_TXDN2 GND 15 GND LAN4_TXDP1 LAN4_TXDN1 GND LAN4_TXDP3 LAN4_TXDN3 GND USB_OC6 USB_OC7 USB_OC8 USB_OC9 GND 14 GND USB_OC45-L 13 GND USB8-P USB8-N GND USB9-P USB9-N GND 12 GND USB6-P USB6-N GND USB7-P USB7-N GND
CompactPCI J4 Connector Pin Z A B C D E F 25 GND PMC IO:P1 PMC IO:N1 NC PMC IO:P2 PMC IO:N2 GND 24 GND PMC IO:P3 PMC IO:N3 NC PMC IO:P4 PMC IO:N4 GND 23 GND NC NC NC NC NC GND 22 GND PMC IO:P5 PMC IO:N5 NC PMC IO:P6 PMC IO:N6 GND 21 GND PMC IO:P7 PMC IO:N7 NC PMC IO:P8 PMC IO:N8 GND 20 GND NC NC NC NC NC GND 19 GND PMC IO:17 PMC IO:19 NC PMC IO:18 PMC IO:20 GND 18 GND PMC IO:21 PMC IO:23 NC PMC IO:22 PMC IO:24 GND 17 GND NC NC NC N
cPCI-6530 CompactPCI J5 Connector Pin Z 22 GND A B C D E F PWELED-L LAN4_LED_ACT-L LAN4_CT LAN3_LED_ACT-L LAN3_CT GND 21 GND EDP_CN_TX_P1 EDP_CB_TX_N1 GND EDP_CN_TX_P3 EDP_CN_TX_N3 GND 20 GND EDP_CN_TX_P0 EDP_CN_TX_N0 GND EDP_CN_TX_P2 EDP_CN_TX_N2 GND 19 GND GND GND GND EDP_AUX_P EDP_AUX_N GND 18 GND NC NC GND NC NC GND 17 GND NC NC GND NC NC GND 16 GND GND GND EDP_HPD GND GND GND 15 GND NC NC GND SATA_RXP2 SATA_RXN2 GND 14 GND NC NC GND SATA-TXP2
This page intentionally left blank.
cPCI-6530 Important Safety Instructions For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked in this manual and on the associated equipment before handling/operating the equipment. X Read these safety instructions carefully. X Keep this user’s manual for future reference. X Read the specifications section of this manual for detailed information on the operating environment of this equipment.
X Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel. A Lithium-type battery may be provided for uninterrupted, backup or emergency power. WARNING: X 40 Risk of explosion if battery is replaced with one of an incorrect type. Dispose of used batteries appropriately.
cPCI-6530 Getting Service Contact us should you require any service or assistance. ADLINK Technology, Inc. Address: 9F, No.166 Jian Yi Road, Zhonghe District New Taipei City 235, Taiwan ᄅؑקխࡉ৬ԫሁ 166 ᇆ 9 ᑔ Tel: +886-2-8226-5877 Fax: +886-2-8226-5717 Email: service@adlinktech.com Ampro ADLINK Technology, Inc. Address: 5215 Hellyer Avenue, #110, San Jose, CA 95138, USA Tel: +1-408-360-0200 Toll Free: +1-800-966-5200 (USA only) Fax: +1-408-360-0222 Email: info@adlinktech.com ADLINK Technology (China) Co.
ADLINK Technology, Inc. (French Liaison Office) Address: 15 rue Emile Baudot, 91300 Massy CEDEX, France Tel: +33 (0) 1 60 12 35 66 Fax: +33 (0) 1 60 12 35 66 Email: france@adlinktech.com ADLINK Technology Japan Corporation Address: ͱ101-0045 ᵅҀ䛑गҷ⬄ऎ⼲⬄䤯 ⬎ފ3-7-4 ⼲⬄ 374 ɛɳ 4F KANDA374 Bldg. 4F, 3-7-4 Kanda Kajicho, Chiyoda-ku, Tokyo 101-0045, Japan Tel: +81-3-4455-3722 Fax: +81-3-5209-6013 Email: japan@adlinktech.com ADLINK Technology, Inc.
