Owner's manual

6 Specifications

Serial Ports • Up to three serial ports

• One RS-232/422/485 serial port on front panel (cPCI-6530V)

• Up to two RS-232/422/485 COM port routed to RTM

USB 2.0 • One USB 2.0 port on front panel

• Up to six USB 2.0 ports routed to rear transition module

USB 3.0 • One USB 3.0 for cPCI-6530 version, additional one USB 3.0

for cPCI-6530V version

PMC/XMC • One 64-bit/33,66,133 MHz PMC site or PCIe x8 Gen 2 XMC

site for cPCI-6530V version with rear I/O

• Two 64-bit/33,66,133 MHz PMC sites or PCIe x8 Gen 2 XMC

sites on cPCI-6530 version

Audio • High definition audio routed to rear

TPM Atmel AT97SC3204 TPM (upon request) supporting:

• Over/Under voltage detection

• Low/High frequency sensor/filter

• Reset filter

• Memory encryption/decryption

Storage

Interfaces

• One mSATA slot

• One onboard 2.5” SATA connector supporting SATA 6Gb/s

drive on cPCI-6530V

• Optional CFast socket by adapter board on cPCI-6530

(space shared with 2.5” SATA drive)

• One SATA 7-pin 3Gb/s connector onboard

• Three SATA 3Gb/s channels routed to RTM

BIOS • AMI® EFI BIOS, 64Mbit SPI flash memory, supports

Configurable TDP (can be set as Nominal and Down)

Faceplate I/O cPCI-6530V (4HP)

• 2x 10/100/1000BASE-T Ethernet ports

• 1x DVI-I port

• 2x USB 3.0 ports

• 1x USB 2.0 port

• 1x RJ-45 serial port

• 1x PMC/XMC slot

cPCI-6530 (4HP)

• 2x 10/100/1000BASE-T Ethernet ports

• 1x USB 3.0 ports

• 1x USB 2.0 port

• 2x PMC/XMC slots

Table 2-1: cPCI-6530 Processor Blade Specifications