User Manual

Page 52
Feature Options Description
V1.05 Read only Display actual voltage of the V1.05.
VMEM Read only Display actual voltage of the VMEM.
V1.00 Read only Display actual voltage of the V1.00.
V3.30 Read only Display actual voltage of the V3.30.
VIN Read only Display actual voltage of the VIN.
AIN 7 Read only Display actual voltage of the AIN7.
9.2.6.4 System Management > Runtime Statistics
Feature Options Description
Runtime Statistics Info only
Total Runtime Read only The returned value specifies the total time in minutes the
system is running in S0 state.
Current Runtime Read only The returned value specifies the time in seconds the
system is running in S0 state.
This counter is cleared when the system is removed from
the external power supply.
Power Cycles Read only The returned value specifies the number of times the
external power supply has been shut down
Boot Cycles Read only The Bootcounter is increased after a HW- or SW-Reset or
after a successful power-up.
Boot Reason Read only The boot reason is the event which causes the reboot of
the system.
9.2.6.5 System Management > Flags
Feature Options Description
Flags Info only
BMC Flags Read only
BIOS Select Read only Display the selection of current BIOS ROM.
ATX/AT-Mode Read only Display ATX/AT-Mode.
Exception Code Read only System exception reason.