User Manual

Page 57
Feature Options Description
IGFX Boot Display Device CRT Select the video device which will be activated during
POST.This has no effect if external graphic present.
EDP to LVDS Bridge Configuration Info only
Data format and Color Depth VESA 24 bpp
JEIDA 24 bpp
JEIDA/vesa 18 bpp
Data format and color depth select
LVDS Output Mode Dual LVDS bus
Single LVDS bus
Single/Dual mode select
DE Polarity Active High
Active Low
DE polarity select
Vsync Polarity Active High
Active Low
Vsync polarity select
Hsync Polarity Active High
Active Low
Hsync polarity select
GT – Power Management Control Info only
RC6 (Render Standby) Enabled
Disabled
Check to enable render standby support.
9.3.4 SATA
Feature Options Description
SATA Info only
SATA Controller(s) Enabled
Disabled
Enable / Disable Serial ATA.
SATA Mode Selection IDE Mode
AHCI Mode
Select IDE / AHCI
SATA Test Mode Enabled
Disabled
Test Mode enable / disable.
SATA Controller Speed Gen1
Gen2
SATA speed support Gen1 or Gen2
SATA Port Configuration Submenu
9.3.4.1 SATA > SATA Port Configuration
Feature Options Description
SATA Port Configuration Info only
Port X Disabled
Enabled
Enable/Disable SATA Port X.
HotPlug Enabled
Disabled
Enabl / Disable SATA PORT X hotplug.