User Manual

Page 8

Specifications

2.1

General

X CPU: Single, dual or quad-core Intel® Atom™ or Celeron® processor

• Atom™ E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333)

• Atom™ E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333)

• Atom™ E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066)

• Atom™ E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066)

• Atom™ E3805 1.33 GHz 533 (No Turbo, No Graphics) 4W (2C/1066)

• Atom™ E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066)

• Celeron

N2930 1.83 GHz, 688/854 (Turbo) 7.5W (4C/1333)

• Celeron

J1900 2 GHz, 688/854 (Turbo) 10W (4C/1333)

Supporting: Single, dual or quad Out-of-Order Execution (OOE) processor cores,

Intel® VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64 architecture, IA 32-bit ,

PCLMULQDQ Instruction DRNG, Intel® Thermal Monitor (TM1 & TM2)

Note: Availability of features may vary between processor SKUs.

X Memory: Single SODIMM socket for up to 4 GB non-ECC 1333/1066 MHz DDR3L memory

X Embedded BIOS: AMI EFI with CMOS backup in 8MB SPI BIOS

X Expansion Busses

o PCI 32-bit rev 2.3 at 33 MHz supporting 4 bus masters

o ISA 16-bit (through LPC-ISA bridge), no DMA support

o SMBus (system) , I

C (user)

X SEMA Board Controller: supporting voltage/current monitoring, power sequence, debug

support, AT/ATX mode control, logistics and forensic information, flat panel control, general

purpose I

C, watchdog timer

X Debug Headers: 40-pin multipurpose flat cable connector for use in combination with DB-40

debug module providing BIOS POST code LEDs, BMC access, SPI BIOS flashing,

power test points, debug LEDs