Owner's manual
Table Of Contents
- ETX-CV
- Revision History
- Table of Contents
- Preface
- 1 Introduction
- 2 Specifications
- 3 Function Diagram
- 4 Mechanical Dimensions
- 5 Embedded Functions
- 6 Pin-out and Signal Descriptions
- 7 System Resources
- 8 BIOS Setup Utility
- 9 BIOS Checkpoints, Beep Codes
- Appendix A: Connectors and Mounting
- Important Safety Instructions
- Getting Service
ETX-CV User’s ManualPage 10
2.8 Power Specifications
f Input Power: AT mode and ATX mode
f Power Management: ACPI 3.0 compliant with battery support
f Power States: supports S0, S1, S3, S4, S5
Test Configuration
Function Configuration
Memory Transcend 4GB DDR3 1333 SODIMM (I) (SEC 107 HCH9K4B260846C)
Graphics Intel® Atom® N2000/D2000 Series Embedded Media and Graphics Driver
Hard Drive Seagate ST320LT020 MomentusThin 320G
Backplane ETX-Proto B3
Power Supply FSP FSP350-60PFG 350W
Intel
®
Atom™ Processor N2600 1.66Gz, (1MB L2 cache, 3.5W)
Power State Power Requirement Current Power
Windows 7 logon screen (idle) +5V (4.88V) 1.29A 6.30W
Max. Load (Intel Power Utility Tool) +5V (4.86V) 2.04A 9.91W
S5 Mode (soft off) 5V Standby 0.06A 0.30W
S3 Mode (suspend to RAM) 5V Standby 0.07A 0.35W
Intel
®
Atom™ Processor N2800 1.86Gz, (1MB L2 cache, 6.5W)
Power State Power Requirement Current Power
Windows 7 logon screen (idle) +5V (4.82V) 1.52A 7.33W
Max. Load (Intel Power Utility Tool) +5V (4.80V) 2.83A 13.58W
S5 Mode (soft off) 5V Standby 0.07A 0.35W
S3 Mode (suspend to RAM) 5V Standby 0.09A 0.45W
Intel
®
Atom™ Processor D2550 1.86GHz, (1MB L2 cache, 10 W)
Power State Power Requirement Current Power
Windows 7 logon screen (idle) +5V (4.88V) 1.78A 8.69W
Max. Load (Intel Power Utility Tool) +5V (4.84V) 2.89A 13.99W
S5 Mode (soft off) 5V Standby 0.057A 0.29W
S3 Mode (suspend to RAM) 5V Standby 0.09A 0.45W