Owner's manual
Table Of Contents
- ETX-CV
- Revision History
- Table of Contents
- Preface
- 1 Introduction
- 2 Specifications
- 3 Function Diagram
- 4 Mechanical Dimensions
- 5 Embedded Functions
- 6 Pin-out and Signal Descriptions
- 7 System Resources
- 8 BIOS Setup Utility
- 9 BIOS Checkpoints, Beep Codes
- Appendix A: Connectors and Mounting
- Important Safety Instructions
- Getting Service
ETX-CV User’s Manual Page 41
ETX-CV User’s Manual Page 41
F4 The < F4 > key allows you to save any changes you have made and exit Setup. Press the < F4 > key
to save your changes. The following screen will appear:
Press the < Enter > key to save the configuration and exit. You can also use the < Arrow > key
to select Cancel and then press the < Enter > key to abort this function and return to the previous screen.
ESC The < Esc > key allows you to discard any changes you have made and exit the Setup. Press the
< Esc > key to exit the setup without saving your changes. The following screen will appear:
Press the < Enter > key to discard changes and exit. You can also use the < Arrow > key to select
Cancel and then press the < Enter > key to abort this function and return to the previous screen.