Owner's manual
Table Of Contents
- ETX-CV
- Revision History
- Table of Contents
- Preface
- 1 Introduction
- 2 Specifications
- 3 Function Diagram
- 4 Mechanical Dimensions
- 5 Embedded Functions
- 6 Pin-out and Signal Descriptions
- 7 System Resources
- 8 BIOS Setup Utility
- 9 BIOS Checkpoints, Beep Codes
- Appendix A: Connectors and Mounting
- Important Safety Instructions
- Getting Service
ETX-CV User’s Manual Page 45
ETX-CV User’s Manual Page 45
8.3.2 ACPI Settings
You can use this screen to select options for the ACPI configuration settings. Use the up and
down < Arrow > keys to select an item. Use the < + > and < - > keys to change the value of
the selected option. A description of the selected item appears on the right side of the screen.
The settings are described on the following pages. An example of the ACPI Settings screen is
shown below.
Enable APIC Auto Configuration
BIOS ACPI Auto Configuration. Set this value to Enabled/Disabled.
Enable Hibernation
System ability to Hibernate (OS/S4 Sleep State). Set this value to Enabled/Disabled.