Owner's manual
Table Of Contents
- ETX-CV
- Revision History
- Table of Contents
- Preface
- 1 Introduction
- 2 Specifications
- 3 Function Diagram
- 4 Mechanical Dimensions
- 5 Embedded Functions
- 6 Pin-out and Signal Descriptions
- 7 System Resources
- 8 BIOS Setup Utility
- 9 BIOS Checkpoints, Beep Codes
- Appendix A: Connectors and Mounting
- Important Safety Instructions
- Getting Service
ETX-CV User’s Manual Page 47
ETX-CV User’s Manual Page 47
8.3.3 Trusted Computing
You can use this screen to select options for the Trusted Computing settings. Use the up and
down < Arrow > keys to select an item. Use the < + > and < - > keys to change the value of
the selected option. A description of the selected item appears on the right side of the screen.
The settings are described on the following pages. An example of the Trusted Computing screen
is shown below.
Security Device Support
Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG
EFI protocol and INT1A interface will not be available.