Owner's manual
Table Of Contents
- ETX-CV
- Revision History
- Table of Contents
- Preface
- 1 Introduction
- 2 Specifications
- 3 Function Diagram
- 4 Mechanical Dimensions
- 5 Embedded Functions
- 6 Pin-out and Signal Descriptions
- 7 System Resources
- 8 BIOS Setup Utility
- 9 BIOS Checkpoints, Beep Codes
- Appendix A: Connectors and Mounting
- Important Safety Instructions
- Getting Service
ETX-CV User’s ManualPage 8
2 Specifications
2.1 General
f CPU: Intel® Atom™ N2600 1.66GHz with 1MB L2 cache, 3.5W
Intel® Atom™ N2800 1.83GHz with 1MB L2 cache, 6.5W
Intel® Atom™ D2550 1.86GHz with 1MB L2 cache, 10W
- On-die primary 32-kB instructions cache and 24-kB write back data cache
- Intel® Hyper-Threading Technology, 2-threads per core
- Supports C0 and C1 states only for D2550
- Supports C0-C4, C1E-C4E and Deep Power Down Technology (code named C6)
for N2600/N2800
f Memory: Single SODIMM socket supporting:
- up to 4 GB of non-ECC, un-buffered, 1066 MHz standard DDR3 SODIMM memory
f Chipset: Intel® NM10 Express chipset
f BIOS: AMI Aptio UEFI on 16Mbit SPI flash
f Hardware Monitor: Supply voltages and CPU temperature
f Watchdog Timer: Programmable timer ranges to generate RESET
f Expansion Busses: 32-bit PCI 2.3 Masters at 33 MHz
ISA 16-bit (via PCI/ISA bridge), no DMA support
SMBus/I
2
C
2.2 Integrated Video
f GPU: Integrated in CPU, supports dual independent displays
f VGA Interface: Analog RGB support by 350Hz RAMDAC, resolution up to 1920 x1200
(WUXGA) @ 60Hz
f LVDS Interface:
- single/dual channel 18/24-bit with resolution up to 1920 x1200