Instruction Manual

Chapter 2 Product Overview

ETX-PVR Reference Manual 11

Figure 2-6. Connector and Socket Locations (Top Side)

J4 ETX X4 (on

back of the

board; see

Figure 2-7.)

Standard 100-pin, 0.6 mm Hirose connector for IDE, Ethernet, SMBus, I2C,

speaker, VBat, and power management signals

J6 SODIMM Standard un-buffered 204-pin socket for DDR3 memory

J7 LPC Not Supported

J8 SATA1 Standard 7-pin, 1.27mm right-angle connector for serial ATA signals

J9 SATA2 Standard 7-pin, 1.27mm right-angle connector for serial ATA signals

NOTE Pin-1 is shown as a black pin (square or round) in all connectors and jumpers in

all illustrations.

Table 2-2. Connector and Socket Descriptions (Continued)

Key:

J6 - DDR3 SODIMM socket

J7 - Not supported

J8 - SATA1

J9 - SATA2

JP1 - See jumper table

ETX-PVR_Top_Conn_b

JP1