Instruction Manual

TME-EXP-ETH8-1V3 Rev 1.3 Page 10 of 17
2.2 Hardware Setup
Caution Be sure to observe the EMC security measures. Make sure you are always at
the same potential as the module.
Caution Do never connect or disconnect the EXP-ISO-COM8 Add-on Module with a
CPU board while that is running.
Be sure that your power supply is able to provide enough current to your system. An insufficient power supply
leads to an instable system.
The EXP-ETH8 need an extra heat sink for standard environment temperatures from –20 °C … +60 °C as well
as the extended range of -40 °C ... +85 °C.
2.3 Software Setup
Driver packages are available for all the common operating systems:
Please contact our support department at http://askanexpert.adlinktech.com or have a look at the website
www.adlinktech.com or http://downloadcenter.intel.com for downloading the necessary drivers. Installation
guide and all necessary information is provided in the driver package.