M-342 ATX Intel® Core™ i7/i5/i3 Industrial Motherboard User’s Manual Manual Rev.: 2.01 Revision Date: March 28, 2012 Part No: 50-1Z087-1010 Advance Technologies; Automate the World.
Revision History Revision Release Date Description of Change(s) 2.00 2011/12/05 Initial release 2.
M-342 Preface Copyright 2011 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Disclaimer The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.
Using this Manual Audience and Scope The M-342 User’s Manual is intended for hardware technicians and systems operators with knowledge of installing, configuring and operating industrial grade systems. Manual Organization This manual is organized as follows: Preface: Presents important copyright notifications, disclaimers, trademarks, and associated information on the proper understanding and usage of this document and its associated product(s).
M-342 Conventions Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly. Additional information, aids, and tips that help users perform tasks. NOTE: CAUTION: WARNING: Preface Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.
This page intentionally left blank.
M-342 Table of Contents Revision History...................................................................... ii Preface .................................................................................... iii List of Figures ........................................................................ xi List of Tables........................................................................ xiii 1 Introduction ........................................................................ 1 1.1 Overview.............
5 BIOS Setup ........................................................................ 37 5.1 Starting the BIOS ............................................................... 37 5.2 Main Setup......................................................................... 41 5.3 Advanced BIOS Setup ....................................................... 43 5.3.1 PCI Subsystem Settings ................................................ 44 5.3.2 ACPI Settings ......................................................
M-342 Important Safety Instructions .............................................. 83 Getting Service......................................................................
This page intentionally left blank.
M-342 List of Figures Figure 1-1: Figure 1-2: Figure 2-1: Figure 2-2: M-342 Block Diagram ...................................................... 5 M-342 Board Dimensions .............................................. 11 M-342 Rear I/O Layout .................................................. 13 M-342 Board Layout ......................................................
This page intentionally left blank.
M-342 List of Tables Table Table Table Table Table Table Table Table Table Table Table Table 1-1: 1-2: 1-3: 1-4: 1-5: 2-1: B-1: B-2: B-3: B-4: B-5: B-6: List of Tables M-342 General Specifications.......................................... 3 Pentium® Processor G850 Power Consumption ............ 8 Core™ i3-2120 Processor Power Consumption.............. 9 Core™ i5-2400 Processor Power Consumption.............. 9 Core™ i7-2600 Processor Power Consumption............ 10 M-342 Board Layout Legend ...........
This page intentionally left blank.
M-342 1 Introduction 1.1 Overview The ADLINK M-342 is an ATX industrial motherboard supporting the 2nd Generation Intel® Core™ i7/i5/i3 and Pentium® processors in LGA1155 package to deliver a scalable high performance platform for a wide array of industrial applications. The M-342 supports 32nm process CPUs at up to 3.4 GHz with integrated graphics and memory controllers, Direct Media Interface (DMI) and Flexible Display Interface (FDI) connectivity to the Intel® Q67 Express Chipset.
1.2 Features 2 X ATX form factor (305 mm x 244 mm) X Supports Intel® Core™ i7/i5/i3 and Pentium® processors in LGA1155 package X Integrated Intel® HD Graphics X One PCIe x16 slot, one PCIe x4 slot, five PCI slots X Dual Gigabit Ethernet X 12x USB 2.
M-342 1.3 Specifications System CPU • • • • Intel® Core™ i7-2600, 3.4 GHz, 8M Cache, 95W TDP Intel® Core™ i5-2400, 3.1 GHz, 6M Cache, 95W TDP Intel® Core™ i3-2120, 3.3 GHz, 3M Cache, 65W TDP Intel® Pentium® G850, 2.
Graphics Display Integrated Intel® HD Graphics VGA Dsub-15 connector, up to 2048x1536 @ 75 Hz DVI-D DVI-D connector, up to 1920x 1200 @ 60 Hz HDMI HDMI Type A connector, up to 1920x 1200 @ 60 Hz Controller Ethernet • Dual Gigabit Ethernet (Intel® 82579LM Gigabit Ethernet PHY, Intel® 82574L Gigabit Ethernet Controller) • Supports Preboot Execution Environment (PXE), Wake-On-LAN, and Intel® AMT 7.
M-342 1.4 Block Diagram DDR Channel A Core™ i7/i5/i3 quad/dual cores DDR3 1066/1333 MHz 32nm process LGA1155 package DIMM X4 PCIe x16 PCIe x16 Gen2, 5GT/s DDR Channel B DMI FDI VGA HDMI DDPC HDMI DDPC DVI DDPC Intel® Q67 PCH PCIe x1 Intel 82579LM RJ-45 (LAN1) PCIe x1 Intel 82574L RJ-45 (LAN2) PCIe x4 PCIe x4 slot PCI Bus 5x PCI slot PCIe Controller SATA (2x 6 Gb/s, 4x 3 Gb/s) SATA USB 2.0 (4x rear, 8x internal) USB 2.
1.5 Functional Description Processor Support The M-342 is an industrial motherboard supporting the 2nd generation Intel® Core™ processor family (Intel® Core™ i7/i5/i3) in LGA1155 socket. An integrated memory controller supports dual channel 1066/1333 MHz DDR3 and Intel® HD Graphics is integrated onboard the CPU. The CPU provides a PCI Express x16 for external graphics or expansion. Direct Media Interface (DMI) and Flexible Display Interface (FDI) provide connectivity to the Intel® Q67 Express Chipset.
M-342 Serial ATA The M-342 provides two SATA 6 GB/s ports and four SATA 3 GB/s ports. Intel® Rapid Storage Technology supports AHCI and RAID 0/1/5/10 functionality. Hardware monitoring A built-in, proactive hardware monitoring system in the Super I/O monitors the CPU temperature, system fan speed, and voltage levels to prevent overheating and/or component damage, effect timely failure detection, and ensure stable supply of current for critical components.
1.6 Power Consumption Test Configuration Memory 4x Transcend DDR3-1333 2G (Hynix H5TQ2G83BFR) Graphics Intel® Graphics Media Accelerator HD (integrated) Storage WD WD1002FAEX SATA 3 Gb/s 1TB Power Supply FSP46060PLN 460W Intel® Pentium® Processor G850 (3M Cache, 2.90 GHz) DOS (idle) Power Req. +12V +5V +3.3V Total Current (A) 1.80 0.88 1.64 — 21.60 4.40 5.41 31.4 Power (W) Windows XP, logon screen (idle) Power Req. +12V +5V +3.3V Total Current (A) 1.04 0.86 1.
M-342 Intel® Core™ i3-2120 Processor (3M Cache, 3.30 GHz) DOS (idle) Power Req. +12V +5V +3.3V Total Current (A) 2.68 0.89 1.60 — Power (W) 32.16 4.45 5.28 41.9 Windows XP, logon screen (idle) Power Req. +12V +5V +3.3V Total Current (A) 0.98 0.49 1.47 — Power (W) 11.76 2.45 4.85 19.1 Windows XP, Total System Stress (BurnIn Test) Power Req. +12V +5V +3.3V Total Current (A) 3.55 1.50 1.70 — Power (W) 42.6 7.50 5.61 55.
Intel® Core™ i7-2600 Processor (8M Cache, 3.40 GHz) DOS (idle) Power Req. +12V +5V +3.3V Total Current (A) 4.82 0.89 1.75 — Power (W) 57.8 4.45 5.78 68.1 Windows XP, logon screen (idle) Power Req. +12V +5V +3.3V Total Current (A) 1.06 0.51 1.54 — Power (W) 12.7 2.55 5.08 20.4 Windows XP, Total System Stress (BurnIn Test) Power Req. +12V +5V +3.3V Total Current (A) 6.73 1.54 1.86 — Power (W) 80.76 7.70 6.14 94.
M-342 1.
1.8 Package Contents Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from the dealer before returning any product to ADLINK.
M-342 2 Hardware Information 2.
DVI-D Connector Pin # Signal Pin # Signal 1 TMDS Data2- 16 Hot Plug Detect 2 TMDS Data2+ 17 TMDS Data0- 3 TMDS Data2/4 Shield 18 TMDS Data0+ 4 TMDS Data4- 19 TMDS Data0/5 Shield 5 TMDS Data4+ 20 TMDS Data5- 6 DDC Clock 21 TMDS Data5+ 7 DDC Data 22 TMDS Clock Shield 8 Analog Vertical Sync 23 TMDS Clock + 9 TMDS Data1- 24 TMDS Clock - 10 TMDS Data1+ C1 NC 11 TMDS Data1/3 Shield C2 NC 12 TMDS Data3- C3 NC 13 TMDS Data3+ C4 NC 14 +5 V Power C5 NC 15
M-342 VGA Connector.
LAN Port (RJ-45) Refer to the tables below for the LAN port pin and LED definitions.
M-342 2.
AAFP1 Front Panel Audio Header ATX12V1 ATX 12V Power Connector DIMM_A1/A2 240-pin DIMM slots (Channel A) DIMM_B1/B2 240-pin DIMM slots (Channel B) EATXPWR1 ATX Power Connector CLCMOS Clear CMOS Jumper COM1~6 Serial Port Connectors 1~6 CPU_FAN CPU Fan Connector F_PANEL System Panel Pin Header JLPC LPC Pin Header JP1~3 COM6 Mode Jumpers LPT1 Printer Port Connector PCIEX4_1 PCI Express x4 slot PCIEX16_1 PCI Express x16 slot PCI1~5 PCI slots PSON1 AT/ATX Mode Jumper SATA1~2 SATA
M-342 2.3 Onboard Connectors & Jumpers Front Panel Audio Pin Header (AAFP1) Pin # Signal Pin # Signal 1 MIC2_L 2 AGND 3 MIC2_R 4 FP_PRES# 5 LIN2_R 6 SRTN1 7 SENSE A 8 NC 9 LIN2_L 10 SRTN2 1 2 ATX 12V Power Connector (ATX12V1) Pin # Signal 1 GND 2 GND 3 +12V DC 4 +12V DC 2 1 4 3 ATX Power Connector (EATXPWR1) Pin # Signal Pin # Signal 1 +3.3V 13 +3.3V 2 +3.
Serial Port Connectors - RS-232 (COM1~6) Pin # Signal 1 DCD Data Carrier Detect 2 DSR Data Set Ready 3 RXD Receive Data 4 RTS Request to Send 5 TXD Transmit Data 6 CTS Clear to Send 7 DTR Data Terminal Ready 8 RI 9 GND 10 NC Function 1 2 9 10 Ring Indicate Ground Key Serial Port Connector - RS-422/485 (COM6) Pin # RS-422 RS-485 1 TX- DATA- 2 N/A N/A 3 TX+ DATA+ 4 N/A N/A 5 RX+ N/A 6 N/A N/A 7 RX- N/A 8 N/A N/A 9 GND GND 10 Key Key 1 2 9
M-342 CPU Fan Connector (CPU__FAN) Pin # Signal 1 GND 2 Fan power (+12V) 3 Fan Tachometer 4 Fan Speed Control 4 1 System Fan Connector (SYS_FAN) Pin # Signal 1 GND 2 Fan Power (+12V) 3 Fan Tachometer Hardware Information 3 1 21
System Panel Pin Header (F_PANEL1) Pin # 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 Signal Function Pin Group WDSPK Speaker signal NC Chassis Speaker NC P5V Power NC GND Ground Key Lock KEYLOCK Keyboard lock PLED Power LED signal Power LED NC P5V Power LED pull-up GND Ground RESET Button RESETBT RESET signal NC GND Ground Power On Button POWERBT Power-on signal NC NC HDDLED Hard Disk LED signal Hard Disk LED P3V3 Hard Disk LED pull-up NC 1 2 19 20 LPC Pin Header (JLPC) Pin # 22 Signal Pi
M-342 Parallel Port Connector (LPT1) Pin # Signal Pin # Signal 1 Line Printer Strobe 2 Auto-Feed 3 Parallel Data 0 4 Error 5 Parallel Data 1 6 Initialize 7 Parallel Data 2 8 Select 9 Parallel Data 3 10 Ground 11 Parallel Data 4 12 Ground 13 Parallel Data 5 14 Ground 15 Parallel Data 6 16 Ground 17 Parallel Data 7 18 Ground 19 Acknowledge 20 Ground 21 Busy 22 Ground 23 Paper Empty 24 Ground 25 Select 26 NC 1 2 SATA Connectors (SATA1~6) Pin # Signal
SPI Pin Header (SPI) Pin # Signal Pin # Signal 1 +3V ROM 2 GND 3 F_SPI_CS# 4 F_SPI_CLK 5 F_SPI_MISO 6 F_SPI_MOSI 7 SPI_HOLD# 8 NC 1 USB 2.
M-342 2.4 Jumpers Clear CMOS (CLCMOS) The CMOS RAM data contains the date / time and BIOS setting information. CMOS is powered by the onboard button cell battery. To erase the CMOS RAM data: 1. Power down and disconnect power from the system. 2. Short pins 2-3 on JP1. 3. Reconnect power and power up the system. 4. After power up, remove the jumper cap from pins 2-3 and reinstall it to pins 1-2.
AT/ATX Mode Jumper (PSON1) Pin # 26 Signal 1 PSON_AT 2 FRP_PANSWUN 3 NC Status Connection AT Mode 1–2 ATX Mode 2 – 3 (default) JCLRT_C2 Hardware Information
M-342 3 Getting Started This chapter provides information on how to install components on the M-342 motherboard. 3.1 Installing the CPU The M-342 supports an Intel® Core™ i7/i5/i3 or Pentium® processor in an LGA1155 socket. WARNING: Disconnect all power to the board before installing a CPU to prevent damaging the board and CPU. Do not touch socket contacts. Damaging the contacts voids the product warranty. Follow the installation instructions carefully to avoid damaging the board components.
2. Raise the locking arm to unlock the load plate. 3. Lift the load plate to uncover the socket. 4. Remove the plastic protective cover from the socket. Note the locations of the alignment keys (A) and Pin 1 indicator (B). B A Do NOT touch socket contacts.
M-342 5. Hold the CPU using thumb and forefinger as shown. Position the CPU over the socket, matching the notches on the sides of the CPU with the alignment keys on the socket (A). The golden triangle on the CPU must be positioned at the corner of the socket with the Pin 1 indicator as shown (B). B A The CPU fits into the socket in only one orientation. DO NOT force it into the socket to avoid causing damage. WARNING: 6. Carefully place the CPU into the socket vertically.
7. Gently lower the load plate. Make sure the front edge of the plate is under the screw as indicated. 8. Lower the locking arm and fasten it to the retention tab (A). The load plate should be locked underneath the screw as shown (B).
M-342 3.2 Installing the CPU Fan and Heatsink CAUTION: The CPU requires a chassis with an airflow inlet and maximum internal ambient temperature of 50° C. A especially-designed CPU fan and heatsink must be installed before using the motherboard. Failure to install a CPU fan and heatsink may damage the system host board and/or the CPU.
3.3 Installing Memory Modules The M-342 supports up to 16 GB of DDR3 1066/1333 MHz memory modules in four DIMM sockets. A DDR3 module has a 240-pin footprint compared to the legacy 184-pin DDR DIMM. DDR3 modules are notched to facilitate correct installation in the DIMM sockets and prevent installation of DDR2 or DDR modules. Disconnect all power to the board before installing a memory module to prevent damaging the board and memory module .
M-342 3. Align the memory module on the socket making sure that the notch matches the break on the socket. Notch Break 4. Insert the module firmly into the slot until the retaining clips snap back inwards and the module is securely seated.
This page intentionally left blank.
M-342 4 Driver Installation This chapter provides information on how to install the M-342 device drivers under Windows XP. The device drivers are located in the following ADLINK All-in-One CD directories: Chipset X:\CHIP Display X:\VGA Ethernet X:\LAN Audio X:\AUDIO Rapid Storage X:\RAID Mgmt. Engine X:\ME Follow the instructions below to install the required M-342 drivers: 1. Install the Windows operating system before installing any driver.
6. Install the Intel Rapid Storage Technology Utility by extracting and running the program iata_cd.exe in X:\RAID\Intel RST Driver.zip. 7. Install the Management Engine driver by running the program Setup.exe in X:\ME\Intel Management Engine Driver.zip. Follow the instructions given and reboot if required.
M-342 5 BIOS Setup The following chapter describes basic navigation for the AMIBIOS® EFI BIOS setup utility. 5.1 Starting the BIOS To enter the setup screen, follow these steps: 1. Power on the motherboard 2. Press the < Delete > key on your keyboard when you see the following text prompt: < Press DEL to run Setup > 3. After you press the < Delete > key, the main BIOS setup menu displays. You can access the other setup screens from the main BIOS setup menu, such as Chipset and Power menus.
Setup Menu The main BIOS setup menu is the first screen that you can navigate. Each main BIOS setup menu option is described in this user’s guide. The Main BIOS setup menu screen has two main frames. The left frame displays all the options that can be configured. “Grayed” options cannot be configured, “Blue” options can be. The right frame displays the key legend. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white.
M-342 Note: There is a hot key legend located in the right frame on most setup screens. The < F8 > key on your keyboard is the Fail-Safe key. It is not displayed on the key legend by default. To set the Fail-Safe settings of the BIOS, press the < F8 > key on your keyboard. It is located on the upper row of a standard 101 keyboard. The Fail-Safe settings allow the motherboard to boot up with the least amount of options set. This can lessen the probability of conflicting settings.
F10 The < F10 > key allows you to save any changes you have made and exit Setup. Press the < F10 > key to save your changes. The following screen will appear: Press the < Enter > key to save the configuration and exit. You can also use the < Arrow > key to select Cancel and then press the < Enter > key to abort this function and return to the previous screen. ESC The < Esc > key allows you to discard any changes you have made and exit the Setup.
M-342 5.2 Main Setup When you first enter the Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below. System & Board Info BIOS Vendor Displays the BIOS vendor. Core Version Displays the BIOS core version. Compliancy Displays the current BIOS compliancy. Project Version Displays the current BIOS revision.
Displays the BIOS build data. System Time/System Date Use this option to change the system time and date. Highlight System Time or System Date using the < Arrow > keys. Enter new values using the keyboard. Press the < Tab > key or the < Arrow > keys to move between fields. The date must be entered in MM/ DD/YY format. The time is entered in HH:MM:SS format. Note: The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.
M-342 5.3 Advanced BIOS Setup Select the Advanced tab from the setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as SuperIO Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the < Arrow > keys. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages.
5.3.1 PCI Subsystem Settings PCI ROM Priority In case of multiple Option ROMs (Legacy and EFI Compatible), specifies what PCI Option ROM to launch. Options: Legacy ROM, EFI Compatible ROM. PCI Latency Timer Value to be programmed into PCI Latency Timer Register. Options:, 32 PCI Bus Clocks , 64 PCI Bus Clocks, 96 PCI Bus Clocks, 128 PCI Bus Clocks, 160 PCI Bus Clocks, 192 PCI Bus Clocks, 224 PCI Bus Clocks, 248 PCI Bus Clocks. VGA Palette snoop Enable or Disable VGA Palette Registers Snooping.
M-342 SERR# Generation Enable or Disable PCI Device to Generate SERR#. Options: Disabled, Enabled. PCI Express Settings Relaxed Ordering Enable or Disable PCI Express Device Relaxed Ordering. Options: Disabled, Enabled. Extended Tag If Enabled allows device to use 8-bit Tag field as a requester. Options: Disabled, Enabled. No Snoop Enable or Disable PCI Express Device No Snoop option. Options: Disabled, Enabled.
Maximum Payload Set Maximum Payload of PCI Express Device or allow System BIOS to select the value. Options: Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, 4096 Bytes. Maximum Read Request Set Maximum Read Request Size of PCI Express Device or allow System BIOS to select the value. Options: Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, 4096 Bytes. ASPM Support Set the ASPM Level: Force L0s - Force all links to L0s State. Options: Disabled, Auto, Force L0s.
M-342 PCI Express Gen2 Settings Completion Timeout In device functions that support Completion Timeout programmability, allows system software to modify the Completion Timeout value (Default: 50us to 50ms). If 'Shorter' is selected, software will use shorter timeout ranges supported by hardware. If 'Longer' is selected, software will use software will use longer timeout ranges supported by hardware. Options: Default, Shorter, Longer, Disabled.
Atomic0p Requester Enable If supported by hardware and set to "Enable", this function initiates Atomic0p Requests only if the Bus Master Enable bit is in the Command Register Set. Options: Disabled, Enabled. Atomic0p Egress Blocking If supported by hardware and set to "Enable", outbound Atomic0p Requests via Egress Ports will be blocked. Options:Disabled, Enabled.
M-342 Selectable De-emphasis If supported by hardware, this will control transmission deemphasis of target link when operating at 5.0GT/s. Options: 3.5 dB, -6.0 dB Clock Power Management If supported by hardware and set to "Enabled", the device is permitted to use CLKREQ# signal for power management of Link Clock in accordance to protocol defined in appropriate form factor specification. Options: Disabled, Enabled.
5.3.2 ACPI Settings ACPI Sleep State Select the highest ACPI sleep state the system will enter, when the SUSPEND button is pressed. Options: Suspend Disable, S1 (CPU Stop Clock), S3 (Suspend to RAM). Resume On RTC Alarm Enable or disable system wake on alarm event. When enabled, the system will wake at the hr/min/sec specified.
M-342 5.3.3 CPU Configuration Active Processor Cores Number of cores to enable in processor. Options: All, 1, 2, 3. Limit CPUID Value Maximum When Enabled, the processor will limit the maximum CPUID input value to 03h when queried, even if the processor supports a higher CPUID input value. When Disabled, the processor will return the actual maximum CPUID input value of the processor when queried. Enable this option to allow compatibility with older operating systems.
Hardware Prefetcher Enables/disables prefetcher. the Mid Level Cache (L2) streamer Adjacent Cache Line Prefetch Enables/disables the prefetching of adjacent cache lines. Intel® Virtualization Tech When enabled, Intel® Virtualization Technology (Intel® VT) makes a single system appear as multiple independent systems to software. This allows for multiple, independent operating systems to be running simultaneously on a single system. Power Technology Sets the power management features.
M-342 5.3.4 SATA Configuration SATA Mode Options: IDE, RAID, AHCI. Serial-ATA Controller 0 Enable or disable the SATA controller. Options: Disabled, Enhanced, Compatible. Serial-ATA Controller 1 Enable or disable the SATA controller. Options: Disabled, Enhanced.
5.3.5 Intel IGD SWSCI OpRegion DVMT/Fixed Memory Select DVMT/Fixed memory size used by the Integrated Graphics Device. Options: 128MB, 256MB, Maximum. IGD - Boot Type Select the video device which will be activated during POST. This has no effect if an external graphics device is present. Options: VBIOS Default, CRT, DVI, HDMI1, HDMI2. See table below for VBIOS Default display output settings.
M-342 5.3.6 USB Configuration Legacy USB Support Legacy USB Support refers to USB mouse and keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard will not become available until a USB compatible operating system is fully booted with all USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there are no USB drivers loaded on the system. Set this value to enable or disable the Legacy USB Support.
EHCI Hand-Off This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. Options: Enable, Disable. Port 60/64 Emulation Enable or disable I/O port 60h/64h emulation support. Options: Disabled, Enabled. USB transfer time-out The time-out value for Control, Bulk, and Interrupt transfers. Options: 1 sec, 5 sec, 10 sec, 20 sec. Device reset time-out USB mass storage device Start Unit command time-out. Options: 10 sec, 20 sec, 30 sec, 40 sec.
M-342 5.3.7 AMT Configuration You can use this screen to select options for the Intel Active Management Technology settings. AMT This item allows the user to Enable/Disable the Intel AMT function. Un-Configure ME This item allows the user to unprovision the ME function without a password. Options: Enabled, Disabled. WatchDog Enable or disable the WatchDog Timer. OS Timer Sets the OS WatchDog Timer (seconds). BIOS Timer Sets the BIOS WatchDog Timer (seconds).
5.3.8 Super IO Configuration Serial Port 0~5 Configuration Enter the submenu for each serial port to enable/disable and view the I/O port and IRQ settings. Serial Port Enable or disable Serial Port 0~5.
M-342 Device Settings Set the serial port address and IRQ. Options: Auto, IO=2F8h; IRQ=3, IO=3F8h; IRQ=3, 4, 5, 6, 7, 9. 10, 11, 12, IO=2F8h; IRQ=3, 4, 5, 6, 7, 9. 10, 11, 12, IO=3E8h; IRQ=3, 4, 5, 6, 7, 9. 10, 11, 12, IO=2E8h; IRQ=3, 4, 5, 6, 7, 9. 10, 11, 12 Parallel Port Configuration Parallel Port Enable or disable Parallel Port. Options: Disabled, Enabled. Change Settings Select an optimal setting for Super IO device.
Smart Fan Mode Configuration System Fan Mode System Smart Fan mode select. Options: Manual Mode, Thermal Cruise Mode, SMART FAN IV Mode SYSFAN PWM/DC Voltage Output Value Range of setting: 0-255. CPU Fan Mode CPU Smart Fan mode select. Options: Manual Mode, Thermal Cruise Mode, SMART FAN IV Mode CPUFAN PWM/DC Voltage Output Value Range of setting: 0-255. Resume on PS2 KB Enable or disable Resume on PS/2 Keyboard function. Resume on PS2 MS Enable or disable Resume on PS2 Mouse function.
M-342 5.3.9 H/W Monitor This screen displays the current status of all of the monitored hardware devices/components such as voltages and temperatures. CPU Warning Temperature Enables or disables the CPU warning temperature function. Options: Disable, 50 C/122 F, 55 C/131, 60 C/140 F, 65 C/149 F, 70 C/158 F, 75 C/167 F. ACPI Shutdown Temperature Enables or disables the ACPI shutdown temperature function. Options: Disable, 70 C/158 F, 75 C/167 F, 80 C/176 F, 85 C/185 F, 90 C/194 F, 95 C/205 F.
5.4 Chipset Setup Select the Chipset tab from the setup screen to enter the Chipset BIOS Setup screen. You can select any of the items in the left frame of the screen to go to the sub menu for that item. The Chipset BIOS Setup screen is shown below.
M-342 5.4.1 North Bridge Configuration VT-d Intel Virtualization Technology for Directed I/O. Options: Enabled/Disabled. Initial Graphics Adapter Selects which graphics controller to use as the primary boot device. Options: IGD, PCI/IGD, PCI/PEG, PEG/IGD, PEG/PCI. IGD Memory Select IGD shared memory size. Options: Disable, 32M, 64M, 96M, 128M, 160M, 192M, 224M, 256M, 288M, 320M, 352M, 384M, 416M, 448M, 480M, 512M. Render Standby Enable or disable Render Standby by Internal Graphics Device.
IGD Multi-Monitor Enable or disable IGD Multi-Monitor by Internal Graphics Device. Options: Disabled, Enabled. PCI Express Port Enable or disable PCIE port. Options: Disabled, Enabled, Auto. PEG Force Gen1 If enabled , PCI Express port will be forced to Gen1. Options: Disabled, Enabled. Detect Non-Compliance Detect non-compliant PCI Express device in PEG. Options: Disabled, Enabled.
M-342 5.4.2 South Bridge Configuration SMBus Controller Enable or disable SMBus Controller. LAN1/2 Controller Controls the onboard LAN1/2 controller. Options: Enabled/Disabled. LAN1/2 Option-ROM Enable or disable LAN1/2 Boot Option for legacy network devices. Wake on LAN1/2 from S5 Enable or disable wake on LAN1/2 from S5.
Restore on AC Power Loss Determines which state the computer enters when AC power is restored after a power loss. The options for this value are Last State, Power On and Power Off. X Power Off: Set this value to always power off the system while AC power is restored. X Power On: Set this value to always power on the system while AC power is restored. X Last State: Set this value to power off/on the system depending on the last system power state while AC power is restored.
M-342 USB Configuration EHCI Controller 1/2 Enable or disable the USB 2.0 (EHCI) support. Options: Disabled, Enabled.
5.4.3 ME Subsystem Configuration ME Subsystem Options: Disabled, Enabled ME Temporary Disable Options: Disabled, Enabled End of Post Message Options: Disabled, Enabled Execute MEBx Options: Disabled, Enabled MEBx Mode Options: Normal, Hidden Ctrl+P, Enter MEBx setup.
M-342 Integrated Clock Chip Configuration ICC Enable Enable or disable Integrated Clock Chip.
5.5 Boot Configuration Select the Boot tab from the setup screen to enter the Boot BIOS Setup screen. You can select any of the items in the left frame of the screen, such as Boot Device Priority, to go to the sub menu for that item. You can display a Boot BIOS setup option by highlighting it using the < Arrow > keys. The Boot Configuration screen is shown below: Quiet Boot When this feature is enabled, the BIOS will display the fullscreen logo during the boot-up sequence, hiding normal POST messages.
M-342 GateA20 Active Upon Request- GA20 can be disabled using BIOS services. Always: do not allow disabling ofGA20; this option is useful when any RT code is executed above 1MB. Options: Upon Request, Always. Option ROM Messages Set the display mode for Option ROM messages. Options: Force BIOS, Keep Current. Interrupt 19 Capture Allows Option ROMs to trap INT 19. Options: Disabled, Enabled. Set Boot Priorities The Boot devices are listed in groups by device type. First press to enter the sub-menu.
5.6 Security Setup Administrator Password Select this option and press < Enter > to access the sub menu. You can use the sub menu to change the Administrator password. User Password Select this option and press < Enter > to access the sub menu. You can use the sub menu to change the User password.
M-342 5.7 Save & Exit Menu Select the Save & Exit tab from the setup screen to enter the Exit BIOS Setup screen. You can display an Exit BIOS Setup option by highlighting it using the < Arrow > keys. The Exit BIOS Setup screen is shown below. Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and reboot the computer so the new system configuration parameters can take effect.
Discard Changes and Exit Setup Now? [Yes] [No] appears in the window. Select [Yes] to discard changes and exit. Save Changes and Reset Reset the system after saving the changes. Discard Changes and Reset Reset system setup without saving any changes. Save Changes Save changes made so far to any of the setup options. Discard Changes Select Discard Changes from the Exit menu and press < Enter >. Select [Yes] to discard changes. Restore Defaults Restore/Load Default values for all the setup options.
M-342 Appendix A - Watchdog Timer A sample program for configuring the M-342’s watchdog timer is shown below. A.
IoWrite8 (NCT6776F_CONFIG_INDEX , 0xEA); // selection GP34 to WDTO IoWrite8 (NCT6776F_CONFIG_DATA , 0x10); IoWrite8 (NCT6776F_CONFIG_INDEX , 0x2B); // Pin80 function selection to GP34 Data8 = IoRead8(NCT6776F_CONFIG_DATA) | 0x10; IoWrite8 (NCT6776F_CONFIG_DATA , Data8); IoWrite8 (NCT6776F_CONFIG_INDEX , 0x07); IoWrite8 (NCT6776F_CONFIG_DATA , 0x08); IoWrite8 (NCT6776F_CONFIG_INDEX , 0x30); Data8 = IoRead8(NCT6776F_CONFIG_DATA) | SetupData>WDT_Control ; //Enable(1) / Disable(0) WDT function.
M-342 Appendix B - System Resources B.
B.
M-342 Hex Range Device F080-F08F F090-F09F F0A0-F0A3 F0B0-F0B7 F0C0-F0C3 F0D0-F0D7 SATA Controller 1 F0E0-F0EF F140-F147 SATA Controller 2 Table B-3: IO Map B.
IRQ# Typical Interrupt Resource Connected to Pin 12 PS/2 Mouse / PCI / ISA IRQ12 via SERIRQ, IRQ12 at ISA bus 13 Math Processor N/A 14 SATA Controller 0 IRQ14 via SERIRQ, IRQ14 at ISA bus 15 SATA Controller 1 IRQ15 via SERIRQ, IRQ15 at ISA bus 16 USB Controller N/A 17 INTEL AMT N/A 18 Standard Dual Channel PCI IDE Controller N/A 19 N/A N/A 20 N/A N/A 21 N/A N/A 22 High Definition Audio Contoller N/A 23 USB Contoller N/A Table B-4: IRQ Lines APIC Mode 80 System Resour
M-342 B.
B.6 PCI Interrupt Routing Map PIRQ A B C D INT Line INTA INTB INTC INTD P.E.
M-342 Important Safety Instructions For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked in this manual and on the associated equipment before handling/operating the equipment. X Read these safety instructions carefully. X Keep this user’s manual for future reference. X Read the specifications section of this manual for detailed information on the operating environment of this equipment.
X Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel. A Lithium-type battery may be provided for uninterrupted, backup or emergency power. WARNING: X 84 Risk of explosion if battery is replaced with one of an incorrect type. Dispose of used batteries appropriately.
M-342 Getting Service Contact us should you require any service or assistance. ADLINK Technology, Inc. Address: 9F, No.166 Jian Yi Road, Zhonghe District New Taipei City 235, Taiwan ᄅؑקխࡉ৬ԫሁ 166 ᇆ 9 ᑔ Tel: +886-2-8226-5877 Fax: +886-2-8226-5717 Email: service@adlinktech.com Ampro ADLINK Technology, Inc. Address: 5215 Hellyer Avenue, #110, San Jose, CA 95138, USA Tel: +1-408-360-0200 Toll Free: +1-800-966-5200 (USA only) Fax: +1-408-360-0222 Email: info@adlinktech.com ADLINK Technology (China) Co., Ltd.
ADLINK Technology, Inc. (French Liaison Office) Address: 15 rue Emile Baudot, 91300 Massy CEDEX, France Tel: +33 (0) 1 60 12 35 66 Fax: +33 (0) 1 60 12 35 66 Email: france@adlinktech.com ADLINK Technology Japan Corporation Address: ͱ101-0045 ᵅҀ䛑गҷ⬄ऎ⼲⬄䤯 ⬎ފ3-7-4 ⼲⬄ 374 ɛɳ 4F KANDA374 Bldg. 4F, 3-7-4 Kanda Kajicho, Chiyoda-ku, Tokyo 101-0045, Japan Tel: +81-3-4455-3722 Fax: +81-3-5209-6013 Email: japan@adlinktech.com ADLINK Technology, Inc.
