Manual

Command Set • 69
3.32 Read Digital I/O and Alarm Status
@Description
Read the digital input channel, digital output channel and the alarm
state at specified analog input module.
@Syntax
@(Addr)DI<CR>
@
Command leading code.
(Addr)
Address ID
DI
Read digital I/O and alarm state.
@Response
!(Addr)(Alarm)(DigitalO)(DigitalI)<CR>
!
Command is invalid.
(Addr)
Address ID.
(Alarm)
0: alarm is disable
1: MOMENTARY mode enable.
2: LATCH mode enable.
(1-character)
(DigitalO)
Digital output channel, port 0 and 1 status.
00: channel 0 is OFF, channel 1 is OFF
01: channel 0 is ON , channel 1 is OFF
02: channel 0 is OFF, channel 1 is ON
03: channel 0 is ON , channel 1 is ON
(2-character)
(DigitalI)
Digital input channel, port status.
00: channel is LOW.
01: channel is HIGH.
(2-character)
(6011/D, 6012/D, 6014D)