Manual

Command Set • 77
3.39 Read Low Alarm Limit
@Description
Read the low alarm limit at specified analog input module.
@Syntax
@(Addr)RL<CR>
@
Command leading code.
(Addr)
Address ID, range (00 - FF).
RL
Read low alarm limit.
@Response
!(Addr)(Data)<CR>
!
Command is valid.
(Addr)
Address ID.
(Data)
Alarm low limit value.
Data format is engineering units. (an + or - sign with
five decimal digits and a decimal fixed point.
@Example
User command: @06RL<CR>
Response: !06-0.3850<CR>
Read the low alarm limit value at address 06H, its value is
-0.3850 Volts, presume this module is configured to accept
1 Volts input.
(6011/D, 6012/D, 6014D)