User Manual

Command Set • 69

3.8 Digital Output

( 6050, 6060, 6063 )

@Description

Set digital output channel value at specified address. This command is

only available to modules involving the digital output function.

@Syntax

#(Addr)(ChannelNo)(OutData)<CR> (6050,6060,6063 Only)

# Command leading code. (1-character)

(Addr) Address ID (2-character)

(ChannelNo)

00 : Set value to all channels

1X : Set value to single channel

First character is 1, Second character is

channel number. (2-character)

(OutData)

Set value to all channels :

Each bit is mapping to each channel number

Set value to single channel :

First character is 0, second character is set to value 0

or 1. (2-character)

@Response

<CR>

?(Addr)<CR>

> Command is valid

? Command is invalid.

(Addr) Address ID.

@Example

User command: #300003<CR>

Response: ><CR>

30 Address ID

00 Set output to all channels

03 (00000011), Channel 0 and 1 are set ON other

channels are set to OFF