Instruction Manual

68 • NuDAM-6521
5.4.12 Set Device ID
@Description
Set the ID of RS-232 network.
@Syntax
$(Addr)6(Device ID)<CR>
$
Command leading code.
(1-character)
(Addr) Address ID (2-character)
6 Set Device ID command
Device ID RS-232 Device ID for up to 24 bytes
@Response
!(Addr)<CR>
or
?(Addr)<CR>
! Command is valid
? Command is invalid.
(Addr) Address ID.
@Example
User command: $306NuDAM Network 1<CR>
Response: !30<CR>
30 Address ID
6 Set Device ID command
NuDAM
Network 1
Set the ID on address #30 to “NuDAM Network 1”