Instruction Manual

70 • NuDAM-6521
5.4.14 Set Delimiter
@Description
Set the delimiter character for the Data Pass command.
@Syntax
$(Addr)C(Delimiter)<CR>
$
Command leading code.
(1-character)
(Addr) Address ID (2-character)
C Set Delimiter command
Delimiter 8 special character:
: [ ] ^ { } | ~
can be used for delimiter
@Response
!(Addr)<CR>
or
?(Addr)<CR>
! Command is valid
? Command is invalid.
(Addr) Address ID.
@Example
User command: $30C{<CR>
Response: !30<CR>
30 Address ID
C Set Delimiter command
{ Use { as Data Pass delimiter