Manual

System Resources 81
NuPRO-E320
Table B-5: IRQ Lines APIC Mode
Note (1): These IRQs can be used for PCI devices when onboard
device is disabled. If IRQ is from ISA, user must reserve IRQ for ISA in
BIOS setup menu.
Note (2): BIOS does not open IRQ 9 setting for ISA bus.
18 N/A
PCI Slot 1/2/3/4, PCIE Port
0/1/2/3/4/5, UHCI Controller 3,
P.E.G Root Port, SATA Host
controller, SMBus Controller,
Thermal Controller, EHCI
Controller #2
Yes
19 N/A
PCI Slot 1/2/3/4, PCIE Port
0/1/2/3/4/5, UHCI Controller
2/7, P.E.G Root Port, SATA
Host controller, SATA Host
controller#1,
Yes
20 N/A ICH9 internal GBE controller No
21 N/A UHCI Controller 5 No
22 N/A ICH9 HDA No
23 N/A
UHCI Controller 1, EHCI
Controller 1
No
IRQ#
Typical Interrupt
Resource
Connected to Pin Available