Instruction Manual

6 Introduction
1.3
Software Support
1.3.1 Programming Library
Windows
®
XP/7 DLLs are provided for the PCI-8134 and PCI-8134A. These
function libraries are shipped with the board.
1.3.2 Motion Creator
This Windows-based utility, also bundled with the product, is used to set up
cards, motors, and systems, and can aid in debugging hardware and
software. It allows users to set I/O logic parameters for their own programs.
1.4
Compatible Terminal Boards
ADLINK provides servos & steppers with terminal boards for easy
connection, specifically boards DIN-814M0, DIN-814M-J3A0, DIN-814Y0,
DIN-814P-A40 for connection to dedicated servo drives. Steppers or other
servo brands can be connected with general purpose terminal boards DIN-
814-GP and DIN-100S0. Compatible servos are as follows.
Servo Terminal Board
Mitsubishi J2 Super DIN-814M0
Mitsubishi J3A DIN-814M-J3A0
Yaskawa Sigma II DIN-814Y0
Panasonic MINAS A4 DIN-814P-A40
Other Serovs and Steppers DIN-814-GP (specific for cable selection)
DIN-100S0