Owner's manual

Function Library 145

B_8154_set_max_override_speed(ByVal AxisNo As

Integer, ByVal OvrdSpeed As Double, ByVal

Enable As Integer) As Integer

@ Argument

AxisNo: Axis number designated to move or stop.

Dist: Specified relative distance to move (unit: pulse)

Pos: Specified absolute position to move (unit: pulse)

StrVel: Starting velocity of a velocity profile in units of pulse per

second

MaxVel: Maximum velocity in units of pulse per second

Tacc: Specified acceleration time in units of seconds

Tdec: Specified deceleration time in units of seconds

SVacc: Specified velocity interval in which S-curve acceleration is

performed.

Note: SVacc = 0, for pure S-Curve. For more details, see sec-

tion 2.4.4

SVdec: specified velocity interval in which S-curve deceleration is

performed.

Note: SVdec = 0, for pure S-Curve. For more details, see sec-

tion 4.2.4

Move_ratio: ratio of (feedback resolution)/(command resolu-

tion), should not be 0

NewPos: specified new absolute position to move

card_id Physical axis AxisNo

……