User guide

36 開始安裝
•IOIF4：
• CN1:
No. Name I/O Function of Axis No. Name I/O Function of Axis
1 DO9 O
Additional isolated digital
output, (9)
6 DO14 O
Additional isolated digital
output, (14)
2 DO10 O
Additional isolated digital
output, (10)
7 DO15 O
Additional isolated digital
output, (15)
3 DO11 O
Additional isolated digital
output, (11)
8 DO16 O
Additional isolated digital
output, (16)
4 DO12 O
Additional isolated digital
output, (12)
9 DOCOM --
Digital output common
5 DO13 O
Additional isolated digital
output, (13)
-- -- --
--
ຝភ
ຝភ
1. DICOM 建議連接至外部電源供應 ( 一般為
24VDC)
2. DOCOM 建議連接至外部電源的地
(GND)
No. Name I/O Function of Axis No. Name I/O Function of Axis
1 EDO4 O
Digital output (4)
6 EDO4- O
Digital output (-) , (4)
2 TG1+ O
Trigger output (+), (1)
7 TG1- O
Trigger output (-), (1)
3 TG2+ O
Trigger output (+), (2)
8 TG2- O
Trigger output (-), (2)
4 AOUT4+ O
Analog command output
(+), (4)
9 DGND --
Digital ground
5 AGND --
Analog ground
preliminary