User Manual

Introduction 11

Analog Trigger (A.Trig)

X Source:

Z All analog input channels; external analog trigger

(EXTATRIG)

X Level: ±Full-scale, internal; ±10V external

X Resolution: 8 bits

X Slope: Positive or negative (software selectable)

X Hysteresis: Programmable

X Bandwidth: 400khz

External Analog Trigger Input (EXTATRIG)

X Input Impedance:

Z 40kΩ for DAQ/PXI-2010

Z 2kΩ for DAQ/PXI-2005/2006/2016

X Coupling: DC

X Protection: Continuous ±35V maximum

Digital Trigger (D.Trig)

X Compatibility: TTL/CMOS

X Response: Rising or falling edge

X Pulse Width: 10ns min

System Synchronous Interface (SSI)

X Trigger lines: 7

Stability

X Recommended warm-up time: 15 minutes

X On-board calibration reference:

Z Level: 5.000V

Z Temperature coefficient: ±2ppm/°C

Z Long-term stability: 6ppm/1000Hr