User Manual

Signal Connections 19
3 Signal Connections
This chapter describes the connectors of the DAQ/PXI-20XX, and
the signal connection between the DAQ/PXI-20XX and external
devices.
3.1 Connectors Pin Assignment
The DAQ/PXI-20XX is equipped with one 68-pin VHDCI-type con-
nector (AMP-787254-1). It is used for digital input/output, analog
input / output, and timer/counter signals, etc. One 20-pin ribbon
male connector is used for SSI (System Synchronous Interface) in
DAQ-20XX. The pin assign-ments of the connectors are defined in
Table 3-1 and Table 3-2.
CH0+ 1 35 CH0-
CH1+ 2 36 CH1-
CH2+ 3 37 CH2-
CH3+ 4 38 CH3-
EXTATRIG 5 39 AIGND
DA1OUT 6 40 AOGND
DA0OUT 7 41 AOGND
AOEXTREF 8 42 AOGND
SDI3_1 / NC* 9 43 SDI3_0 / NC*
SDI2_1 / NC* 10 44 SDI2_0 / NC*
SDI1_1 / NC* 11 45 SDI1_0 / NC*
SDI0_1 / NC* 12 46 SDI0_0 / NC*
AO_TRIG_OUT 13 47 EXTWFTRG
AI_TRIG_OUT 14 48 EXTDTRIG
GPTC1_SRC 15 49 DGND
GPTC0_SRC 16 50 DGND
GPTC0_GATE 17 51 GPTC1_GATE
GPTC0_OUT 18 52 GPTC1_OUT
GPTC0_UPDOWN 19 53 GPTC1_UPDOWN
EXTTIMEBASE 20 54 DGND
AFI1 21 55 AFI0
Table 3-1: 68-pin VHDCI-type pin assignment